Operations of the High Speed 300 RPM

APPLICATION OF THE HIGH SPEED 300 RPM FLOOR MACHINES (MODELS P203 and P173)

Spray Buffing to revitalize an existing floor finish to a “wet look” shine especially in heavy traffic areas using a Powr-HD™ yellow or natural hoghair blend pad.

Dry Buffing with a brush on uneven floors coated with a buffable finish or with a Powr-HD™ tan, beige or white pad on even floor surfaces.

(MODELS P203 and P172)

Follow the same operation procedures described for 175 RPM machines.

APPLICATION OF THE DUAL SPEED 175/320 RPM MACHINES (MODELS P202 and P172)

The Powr-Flite®dual speed machines will operate in a broad range of applications. These machines perform all the applications of the 175 RPM standard speed machines and the 300 RPM high speed machines except the specialized applications.

Do not use dual speed machines for sanding, grinding or scraping.

The dual speed machines are specially designed for spray cleaning of heavy traffic areas.

OPERATION OF THE DUAL SPEED MACHINES

Follow the operation procedures described for 175 RPM machines. The proper speed selection is important to properly operate these machines. Speed selection Low (175 RPM) or High (320 RPM) is made with the switch located on the base and motor housing. (See Picture #4)

Stripping, scrubbing, bonnet cleaning and shampooing should be performed at 175 RPM Low Speed.

Spray buffing and dry buffing should be performed at 320 RPM, High Speed.

Spray cleaning is a two speed maintenance operation. Apply a spray buff chemical such as Powr-Glo®to the floor ahead of the machine. Make the first passes through the spray buff at low speed with an open weave pad such as the Powr-HD™ blue cleaner pad or the brown hoghair blend spray cleaner pad.

Remove the spray cleaning pad and place a buffing pad on the machine such as Powr-HD™ yellow, beige or natural hoghair blend pads.

Switch the speed to High 320 RPM and buff the dulled finish to a high gloss.

Unplug the power cord and wrap it under the cord hook and over the right handle grip. Clean the cord off to prevent heavy soiling and cleaning residues from building up on the cord. This is a good time to inspect the cord for cuts, gashes and loose prongs. Tip the machine back and remove the pad and the drive block or brush.

The condition of the floor pad or brush has a direct affect on the performance of your floor machine. When the pad becomes dirty, turn it over and use the other side. When finished, wash the pad or brush and allow it to dry completely before using it again. Stand the wet brush on the bristles until dry, then hang up the brush.

Do not store the machine with the drive block, pad or brush on the machine.

Wipe off the machine housing and wheels to prevent build-up of unnecessary residue.

TRANSPORTING THE MACHINE

Place the handle in the upright position. Lock the handle cam release lever. Tip the machine back and transport on the wheels.

MAINTENANCE FOR THE P201, P203, P171, P173, P131, P201HD, P171HD, P202

and P172

Once a month remove the motor cover of the unplugged machine by pulling evenly, but firmly, with both hands until the cover is removed. Vacuum out any dust or debris which has accumulated on the motor. Replace the motor cover by setting it over the holes in the hous- ing and firmly pushing it down.

Check and maintain the tightness of all the fasteners. WARNING: Do not over-tighten the switch housing screws.

Picture #4

Speed Switch

Keep the machine clean especially at the handle tube and collar so the handle tube will move freely through the collar.

Inspect the cord for cuts, gashes, or loose prongs; replace as needed.

Disassembly of this motor voids the warranty. Improper disassembly and assembly of this motor can permanently damage the field or rotor.

For P202 & P172 only: The length of the carbon brushes should be inspected annually. If they are no longer extended past the hold- er window, they should be replaced. Replacement of the carbon brushes should only be done by a qualified service technician.

P201 specifications

Addtron Technology has made significant strides in the realm of network communication solutions with its innovative P201 model. This device caters primarily to businesses seeking to enhance their networking capabilities through reliability and high performance. The P201 combines robust hardware features with advanced technologies, making it a standout choice for many organizations.

One of the main features of the Addtron P201 is its dual-port design, which allows for dual Ethernet connectivity. This functionality not only enhances the device's ability to handle multiple connections simultaneously but also provides redundancy in network connections, ensuring uninterrupted service for critical applications. The P201 supports both standard wired and advanced wireless connections, making it versatile for different deployment scenarios.

The P201 is powered by an advanced ARM-based processor, providing exceptional processing power and efficiency. This processor enables the device to manage data traffic seamlessly, reducing latency and increasing overall network throughput. With support for various network protocols, including IPv4 and IPv6, the P201 is well-equipped to handle modern network demands.

One of the standout characteristics of the P201 is its comprehensive security features. It integrates robust firewall capabilities, ensuring that sensitive data remains protected from unauthorized access. Additionally, the P201 supports Virtual Private Network (VPN) functionalities, which allow remote users to safely access the corporate network. This is an essential feature for businesses that rely on remote work, as it provides secure communication channels.

The management of the P201 is tailored for ease of use. The device comes with a user-friendly web interface that simplifies configuration and monitoring. Moreover, it supports centralized management, allowing IT administrators to manage multiple devices from a single location, streamlining maintenance and updates.

In terms of connectivity, the P201 offers multiple options including USB ports for external storage or device connections, as well as integrated wireless capabilities for mobile device connectivity. This flexibility ensures that businesses can adapt the P201 to their specific networking needs without substantial investment.

In conclusion, the Addtron Technology P201 is a powerful network solution that combines advanced features, robust security, and user-friendly management, making it an ideal choice for modern businesses looking to enhance their networking infrastructure. With its reliable performance and versatility, the P201 stands out in the competitive landscape of networking devices.