Troubleshooting, Safety Instructions | Addtron Technology P201

TROUBLESHOOTING

Machine does not run.

The circuit breaker has tripped. Allow the circuit breaker 2 minutes to cool before resetting.

Plug is broken or has loose contact. Replace.

Prevent circuit overload.

Check the pad and change it if it is rough or dirty.

Spray buffing or spray cleaning is not a substitute for scrubbing or mopping a floor. Prepare the floor surface before spray buffing. Eliminate any extension cord that is smaller than 12/3 wire or greater than 25 feet in length.

Unplug anything other than the machine from the circuit or locate another circuit.

Machine will not start.

Circuit breaker is not reset. Reset breaker. Plug is broken or has a loose contact. Replace. Circuit breaker is defective or weak. Replace. Switch is defective. Replace switch.

Rectifier is defective. Replace rectifier (P202 and P172 only).

Machine will not reach operating speed.

Unplug anything else other than the machine from the circuit or locate another circuit.

Motor runs but pad or brush does not turn.

Coupling is broken. Replace. Coupling is not covered under war- ranty. Do not attempt to place a running machine over a block or brush. Always place and remove the block or brush by hand.

SAFETY INSTRUCTIONS

This Floor Machine should be grounded while in use to protect the operator from electric shock. This machine is equipped with a 3- conductor cord and a 3-prong grounded type attachment cap plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect this wire to anything other than the grounding blade.

The Floor Machine is provided with an attachment cap plug, as shown in Sketch A, and is intended for use on a nominal 120 volt circuit. If a properly grounded receptacle, as shown in Sketch A, is unavailable, an adaptor, as shown in Sketch C, is available and should be installed, as shown in Sketch B, if the outlet box that houses the receptacle is grounded. Be sure to fasten the grounding tap to the faceplate screw.

ONE LAST REMINDER! READ ALL INSTRUCTIONS,

WARNINGS AND CAUTIONS BEFORE USING EQUIPMENT.

These guidelines are presented for your protection and convenience. Please read them carefully, since a failure to heed these precautions could result in discomfort or injury. When using an electrical appliance, basic safety precautions should always be followed.

WARNING

TO AVOID FIRE, DO NOT USE WITH A FLAMMABLE OR COMBUSTIBLE LIQUID TO CLEAN FLOOR.

A Tacony Company

3101 Wichita Court • Ft. Worth, TX 76140-1710

P201 specifications

Addtron Technology has made significant strides in the realm of network communication solutions with its innovative P201 model. This device caters primarily to businesses seeking to enhance their networking capabilities through reliability and high performance. The P201 combines robust hardware features with advanced technologies, making it a standout choice for many organizations.

One of the main features of the Addtron P201 is its dual-port design, which allows for dual Ethernet connectivity. This functionality not only enhances the device's ability to handle multiple connections simultaneously but also provides redundancy in network connections, ensuring uninterrupted service for critical applications. The P201 supports both standard wired and advanced wireless connections, making it versatile for different deployment scenarios.

The P201 is powered by an advanced ARM-based processor, providing exceptional processing power and efficiency. This processor enables the device to manage data traffic seamlessly, reducing latency and increasing overall network throughput. With support for various network protocols, including IPv4 and IPv6, the P201 is well-equipped to handle modern network demands.

One of the standout characteristics of the P201 is its comprehensive security features. It integrates robust firewall capabilities, ensuring that sensitive data remains protected from unauthorized access. Additionally, the P201 supports Virtual Private Network (VPN) functionalities, which allow remote users to safely access the corporate network. This is an essential feature for businesses that rely on remote work, as it provides secure communication channels.

The management of the P201 is tailored for ease of use. The device comes with a user-friendly web interface that simplifies configuration and monitoring. Moreover, it supports centralized management, allowing IT administrators to manage multiple devices from a single location, streamlining maintenance and updates.

In terms of connectivity, the P201 offers multiple options including USB ports for external storage or device connections, as well as integrated wireless capabilities for mobile device connectivity. This flexibility ensures that businesses can adapt the P201 to their specific networking needs without substantial investment.

In conclusion, the Addtron Technology P201 is a powerful network solution that combines advanced features, robust security, and user-friendly management, making it an ideal choice for modern businesses looking to enhance their networking infrastructure. With its reliable performance and versatility, the P201 stands out in the competitive landscape of networking devices.