Troubleshooting
Manual cleaning
Cleaner will not run
Possible causes | Remedies | ||
1. | Power cord not plugged in | 1. | Check electrical plug |
2. | Blown fuse/tripped breaker | 2. | Replace household fuse or reset breaker |
3. | Hose not removed from receiver | 3. | Remove hose |
4. | SpotBot shut off automatically during use | 4. | Press start button to resume manual cleaning |
Unusual or odd noise |
|
| |
Possible causes | Remedies | ||
1. | Clean water/solution tank is out of fluid | 1. | Fill clean water/solution tank |
Reduce or no spray |
|
| |
Possible causes | Remedies | ||
1. | Spray tip clogged on Tough stain brush | 1. | Clean spray tip |
2. | Clean water/solution tank is out of fluid | 2. | Fill clean water/solution tank |
3. | Clean water/solution tank is not inserted into the unit securely | 3. | Gently press the clean water/solution tank until you see |
|
|
| "bubbles" coming from the base of the tank |
No suction |
|
| |
Possible causes | Remedies | ||
1. | Tank is full | 1. | Empty tank |
2. | Dirty water/collection tank latch is not down | 2. | Push latch down, securely into place |
3. | Black valve on the dirty water/collection tank is missing | 3. | Replace black valve into dirty water/collection tank |
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at
13
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |