Bissell 33N8A, 78R5 Operations, Getting ready, There are 2 ways you can fill and use the tank

Page 7

Operations

Getting ready

1A.

1B.

1.To fill the clean water/solution tank:

A.Remove the clean water tank by lifting it straight up and then away from the unit.

B.Unscrew the cap at the bottom of the clean water tank.

There are 2 ways you can fill and use the tank:

2.For common stains such as dirt, grime, pet or oily stains, use the fill lines on the left side of the tank and fill with BISSELL

2X compact formula (trial size included)

 

and water.

2.

3.

For dye based stains such as coffee,

 

 

fruit juices, cola and red wine, use the fill

 

 

lines on the right hand side of the tank

 

 

and fill with BISSELL 2X compact formula

 

 

and Oxy GEN2® formula (trial sizes

 

 

included) and water.

 

4.

Tighten black cap on bottom of clean tank

4.

 

and replace.

Tip:

Dry vacuum the area first, before spot cleaning with the SpotBot.

7

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Image 7
Contents Earn Bissell Rewards Dont forget to register your product Thanks for buying a Bissell SpotBotSave These Instructions Grounding Instructions Product view Cord Back view Special featuresFront view Underside viewGetting ready OperationsThere are 2 ways you can fill and use the tank How to begin Automated cleaning To begin cleaningManual cleaning Storage Manual cleaning continuesReduce or no spray TroubleshootingAutomated cleaning SpotBot will not run Unusual or odd noiseThank you for selecting a Bissell product Manual cleaning Cleaner will not run10/11 Replacement parts Bissell SpotBotAccessories Part NameWebsite or E-mail Or Call Warranty Bissell SpotBotLimited One Year Warranty If your Bissell product should require serviceBissell consumer services Bissell Consumer Services