Bissell 6590 How To Use Your Vacuum, Handle Positions, Height Adjustment, Transporting Cleaner

How To Use Your Vacuum

Handle Positions 1

Press the Handle Release Pedal with your foot to place

your vacuum into one of three cleaning positions. 2

1. Upright- For storage and above floor cleaning with tools.

2. Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks.

3

3. Low Cleaning- With the vacuum in normal cleaning position, press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.

Height Adjustment

The Powerfoot/Rotating Floor Brush on your vacuum can be adjusted to clean several floor surfaces.

NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

1.Place Handle in Upright Position.

2.Turn Height Adjustment knob to desired setting.

Lowest Setting	For bare floors.
Medium Settings	For short and medium
	pile carpets.
Highest Setting	For plush pile carpet.

3.Place the Handle in the normal cleaning position and the Powerfoot will adjust to the setting chosen.

NOTE: You may also adjust the setting while in the normal cleaning position.

Tip:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.

Tip:

Your vacuum features

aQuick-Release Cord Wrap. To remove the Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.

Transporting Cleaner

1.To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward.

2.The cleaner can also be moved by using the Carrying Handle.

Carrying Handle

7