Bissell 3750 warranty Replace Drive Belt

Page 12

ug603-5539_3750E_304 6/25/04 2:08 PM Page 12

Replace Drive Belt

Use only BISSELL Replacement Belts in your BISSELL Lift-Off. Style 8 Drive Belt (2 pack) #3200.

1.

Unplug cleaner from electrical outlet.

With Rotating Floor Brush removed from vacuum cleaner (Steps 1-5

2. of Check Rotating Floor Brush and Drive Belt), grasp old Drive Belt and remove from Motor Pulley. Discard old Drive Belt.

Place new Drive Belt over Motor Pulley and stretch other end over

3. Rotating Floor Brush in the space between the bristles.

4. Place ends of Rotating Floor Brush down into slots on sides as shown.

Turn Rotating Floor Brush by hand several times in the direction of

5. Motor Pulley. If properly installed, Drive Belt will center itself on Rotating Brush crown.

6.

Reposition Brush Cover and screws. Tighten screws securely.

12

Image 12

Contents Lift-Off SERIES-220/240VThanks for buying a Bissell Lift-Off Important Safety Instructions Furniture Protection Guard How To Use This Guide How To Put It TogetherAttach Handle To Vacuum Attach Vacuum Hose and ToolsPower Cord Quick Release Power Switch/Brush SwitchHandle Positions Power Height Adjustment Special ToolsPower Cord Storage Transporting CleanerUnplug cleaner from electrical outlet Empty Dirt ContainerFull Line Lock Position Cleaning The Upper Tank & Filter Cleaning The Pre-Motor and Post-Motor FiltersWith a damp cloth Hepa Media Post-Motor Filter assists in the filtrationCheck Rotating Brush and Drive Belt Motor PulleyReplace Drive Belt Clearing Clogs Thermal ProtectorCheck for a clog in the Base or the Hose Suction Inlet Clear Panel Opening Air PassagewayTroubleshooting Replacement Parts Bissell Lift-Off Series If your Bissell product should require serviceWarranty Limited One Year Warranty