Bissell 3590 warranty How To Use This Guide, How To Put It Together, Attach Handle To Vacuum

Page 5

ug603-5202/3590/220-240v/1/03 7/1/04 11:15 AM Page 5

How To Use This Guide

This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User’s Guide thoroughly before assembling your vacuum cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL CleanView for many years.

How To Put It Together

The only tool you’ll need to assemble your vacuum cleaner is a Phillips head screwdriver.

Attach Handle To Vacuum

Locate the vacuum Handle and remove the screw packet

1. taped to the base of the Handle.

Stand the vacuum upright and slide the base of the Handle

2. firmly into the grooves at the top of the vacuum body.

Check to be sure the Handle is fitted to the vacuum

3. body. If there is a gap in front, continue to push firmly until the Handle is flush.

Insert one screw provided from the screw packet into the

4. existing hole. Tighten securely with a Philliphs head screwdriver.

Attach Vacuum Hose and Tools

 

Position the Hose Assembly on the back of the vacuum

1.

as shown.

 

Attach the Hose with the remaining two screws from the

2.

packet. Tighten securely with a Phillips head screwdriver.

 

Grasping the Quick Reach Handle, slide the end of the

3.

Hose Wand onto the Hose Wand Base. Snap the Hose

 

into the Hose Clip.

 

NOTE: The Powerfoot will not operate effectively

 

unless the Hose Wand is firmly attached.

 

Slide the Extension Wand and the Crevice Tool together

4.

into the storage clip as shown.

 

Slide the Dusting Brush Tool into the storage clip as shown.

5.

W A R N I N G :

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SERIES-220/240V CleanViewYour Bissell CleanView is well made, and we back it with a Thanks for buying a Bissell CleanViewImportant Safety Instructions Hose Wand U T I O NHow To Put It Together How To Use This GuideAttach Handle To Vacuum Attach Vacuum Hose and ToolsPower Height Adjustment How To Use Your Bissell CleanView Handle PositionsTransporting Cleaner Place the Handle into the Normal Cleaning PositionSpecial On-Board Tools Power Cord StorageDusting Brush Tool Crevice ToolEmpty Dirt Container Cleaning The Upper Tank & FilterClean strings, hair and other debris from Rotating Floor Cleaning The Pre-Motor and Post-Motor FiltersReplace Drive Belt Brush, paying particular attention to brush endsVacuum cleaner wont run TroubleshootingClearing Clogs Possible CausesVacuum cleaner wont pick up dirt Bissell Consumer ServicesVacuum cleaner is difficult to push If your Bissell product should require servicePart Name Replacement Parts Bissell CleanView SeriesLimited Two Year Warranty
Top Page Image Contents