Assembly
Install Febreze® vacuum bag
Never reuse a vacuum bag. Use only BISSELL bag model 3267 vacuum bags in your BISSELL Velocity Bagged vacuum.
Prior to installing the Febreze® bag, please follow these steps:
1.Remove the plastic bag that contains the Febreze® bag, which was included with your vacuum.
NOTE: If difficult to open, you may need to use scissors to carefully cut open the bag.
2.Locate the Febreze® scent tag at the bottom seal of the vacuum bag. Carefully pull the tab along the perforated lines in the center of the scent tag.
NOTE: Only a portion of the overwrap should be removed.
3.Discard the perforated piece of plastic you removed and proceed with the following installation instructions.
To install your vacuum bag:
4.Unplug cleaner from electrical outlet.
5.Remove the Bag Tank and detach the tank lid.
6.Align the bag opening with the tank lid inlet and attach the cardboard bag collar to the tank lid.
7.Attach the tank lid to the tank and reinsert the tank into the vacuum cleaner. Slide the Lock ‘n Seal lever into the “Lock” position to secure the Bag Tank in place.
Experience the odor elimination technology and freshness of Febreze® as you vacuum with a Febreze® vacuum bag.
NOTE: Do note operate vacuum cleaner without a vacuum bag.
Febreze and related trademarks are owned by The Procter & Gamble Company, Cincinnati, Ohio and used under license by BISSELL Homecare, Inc.
WARNING:
Do not operate cleaner with damp or wet filters or without vacuum bag and all filters in place.
2.
6.
7.
NOTICE:
Unscented replacement bags are available on Bissell.com and through BISSELL Consumer Care. See page 14 for ordering information.
6 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |