
Maintenance and care
Machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts air when the portable deep cleaner is detached. This should be checked and cleaned regularly for any dirt and debris.
1.Step on the pedal and remove the portable spot cleaner. Remove dirty tank.
2.Remove two screws and pull off suction gate door.
3.Wipe suction gate clean and rinse suction gate door.
4.Replace suction gate door and two screws.
Cleaning spray tips
1.Step on the pedal and remove the portable spot cleaner. To remove each spray tip, push tab in and pull it out.
2.Clean by rinsing under hot water.
3.Replace by snapping back in.
WARNING:
To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
2.
Suction
Gate
Spray
Tips
1.
13
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |