Vacuum cleaner is difficult to push

Troubleshooting

Possible causes

1. Incorrect height setting

Visible dust escaping from cleaner

Possible causes

1.Filter door and/or gasket missing or not installed properly

2.Foam filter missing or not installed properly

3.HEPA filter cartridge missing or not installed properly

4.Dirt container not installed properly

5.Dirt container not assembled properly

6.Hose not installed properly

7.Hole or crack in hose

Remedies

1.Turn dial to higher setting

Remedies

1.Check filter door and gasket for proper position

2.Check foam filter for proper position

4.Make sure dirt container is properly positioned and snapped into place

5.Check screen, upper and lower portions of the dirt container for proper assembly

6.Make sure hose is fully seated in hose base, and that the hose is assembled correctly to the unit, see page 5.

Also make sure foot hose is properly attached to diverter area

7.Check hose for holes or cracks and replace if needed

Other maintenance or service not included in the manual should be performed by an

authorized service representative.

Thank you for selecting a BISSELL product.

w w w . b i s s e l l . c o m

176