Maintenance and care
To maintain maximum cleaning perfor- mance, the following maintenance steps must be performed:
Emptying the dirt container
Dirt container should be emptied before debris reaches the FULL line.
1.Turn power OFF (O). Unplug unit from electrical outlet.
2.Grasp the two release buttons on the front of the dirt container, depress both at same time and pull container straight out to remove from vacuum.
3.Empty dirt into garbage can.
NOTE: The dirt container may be washed in warm water with mild detergent. Make sure it is completely dry before replacing. DO NOT PUT IN DISHWASHER.
4.Replace dirt container back in vacuum until it snaps firmly into place.
NOTE: To ensure full suction power, make sure dirt container is thoroughly positioned and locked into place.
Cleaning the separator grill
1.Unplug unit from electrical outlet.
2.Separator grill can be reached by removing the dirt container, reaching into upper tank and turning rim of separator grill
3.Separator grill may be wiped clean with a damp cloth.
4.Replace separator grill by inserting into upper tank and turning clockwise until it is
secured in place .
WARNING:
To reduce the risk of electric shock, turn power switch OFF and discon- nect polarized plug from electrical outlet before performing mainte- nance or troubleshooting checks.
Full Line
2.
4.
2.
4.
6
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |