Troubleshooting
Vacuum cleaner won’t turn on
Possible causes
1.Power cord not plugged in
2.Blown fuse/tripped breaker
WARNING:
To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting.
Remedies
1.Check electrical plug
2.Check/replace fuse or reset breaker
Vacuum cleaner has low suction
Possible causes | Remedies | ||
1. | Dirt container is full | 1. | Empty dirt container |
2. | Dirt container is not installed properly | 2. | Position container correctly and snap firmly into place |
3. | Separator grill is not installed properly | 3. | Position separator grill in upper tank and twist firmly into |
|
|
| place |
4. | Clog in vacuum | 4. | Follow instructions on page 8 to clear clog |
5. | Separator grill is clogged with debris | 5. | Remove and wipe separator grill of all debris |
6. | Foot is loose | 6. | Make sure foot is fully inserted into body of unit |
7. | Filters need replacing | 7. | Visit www.bissell.com or call |
|
|
| replacement filters. |
Visible dirt escaping from vacuum |
|
| |
Possible causes | Remedies | ||
1. | Dirt container is full of debris | 1. | Empty dirt container |
2. | Filter is missing or installed incorrectly | 2. | Check filter for correct installation |
3. | Dirt container installed incorrectly | 3. | Position container correctly and snap firmly into place |
4. | Separator grill is missing or installed incorrectly | 4. | Position separator grill in upper tank and twist firmly |
|
|
| into place |
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at
9
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |