Troubleshooting
Cleaner won’t run.
Possible Causes | Remedies | ||
1 | Power cord not plugged in | 1 | Check electrical plug |
2 | Blown fuse/tripped breaker | 2 | Replace household fuse or reset breaker |
3 | C.I.D. needs to be reset | 3 | Reset C.I.D. (page 5) |
Reduced spray or no spray.
Possible Causes | Remedies |
1Spray Nozzle clogged
2Clean/Solution Tank empty
3Tank not in place properly
1Clean Spray Nozzle
2Check/Refill Tank
3Make sure tank is inserted properly.
Deep Cleaner Won’t pick up cleaning solution.
Possible Cause | Remedies |
1 Dirty/Collection Tank is full | 1 Empty Dirty/Collection Tank |
2 Dirty/Collection Tank drain plug is loose | 2 Check plug for snug fit |
Dual PowerBrushes are not rotating.
Possible Causes | Remedies | |
1 Removable Cartridge not inserted properly/all the way | 1 | Make sure to firmly “snap” the Brush Cartridge |
|
| in place |
2 Broken Belt | 2 | Replace Belt (page 9) |
Water Coming Out Vents.
Possible Causes
1Tank is past full line.
2Unit is not in a horizontal position with the surface being cleaned.
Remedies
1Empty Tank
2 Empty Tank
WARNING:
Do not use an extension cord with this product. The use of an extension cord may result in a severe electrical shock, particularly if the extension cord does not have an electrical rating higher than that of the product, OR if the extension cord does not have a
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
10