Bissell 3574 Large Bulb Belt Cover, Replace Lightbulb, TurboBrush Maintenance, Clearing Clogs

Page 11

Replace Lightbulb Continued

3.Determine the light bulb type of your vacuum:

Standard Bulb (#203-1297) – approximately 1” long, flat end Large Bulb (#203-1007) – approximately 2” long, round end

4.Standard Bulb – remove the bulb from the socket by grasping bulb and pulling straight out. Install the new bulb by pushing it

gently into the socket until the bulb snaps into place.

Large Bulb - remove the bulb from the socket by pushing

 

bulb in gently and turning it towards brush. Install the new

 

bulb by pushing it gently into the socket and turning away

Standard Bulb

from the brush.

5.Reposition lens by inserting the tab on left side and then pushing the right side back into place.

TurboBrush Maintenance

Select Models Only

The TurboBrush should be checked regularly for clogs or debris wrapping around the brush roll.

1.Unplug vacuum from electrical outlet.

2.If a clog is present or debris is visible, unscrew the two screws on the back of the TurboBrush to remove the faceplate and clear any obstructions.

3.To clean debris from the brush roll, remove the screw located on the belt cover. Lift the belt cover. Remove the brush roll from the drive belt and clean debris.

4.Reposition the drive belt on the brush roll. Place ends of brush roll in slots on sides as shown. Reposition belt cover and secure with shorter screw. Reposition faceplate and secure with two longer screws.

Clearing Clogs

Large Bulb

Belt Cover

Low suction, poor pickup, or no suction may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action in the Dirt Container, check for clogs.

1.Unplug cleaner from electrical outlet.

2.Empty Dirt Container.

11

ug603-2559_3574-3576_1005.indd 11

1/4/06 9:45:58 AM

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 3574/3576 Series CleanViewHow To Use This Guide Thanks For Buying a Bissell CleanViewRisk of fire, electric shock, or injury Important Safety InstructionsCord Clip Hose Clip Attach Vacuum Hose and Tools How To Put It TogetherSelect Models Only Attach Handle To VacuumHandle How To Use Your VacuumHeight Adjustment Transporting CleanerSpecial On-Board Tools Power Cord StorageEmpty Dirt Container How To Maintain Your VacuumCleaning The Inner & Outer Circular Filters Full LineReplacing the Post-Motor Filter Cleaning the Pre-Motor FilterPost-Motor Filter Check Rotating Floor Brush and Drive BeltUg603-25593574-35761005.indd Clearing Clogs TurboBrush MaintenanceLarge Bulb Belt Cover Replace LightbulbLouvers Suction Inlet Hose Wand Base Vacuum cleaner won’t runVacuum cleaner won’t pick up dirt TroubleshootingPossible Causes Remedies Vacuum cleaner is difficult to pushVisible dirt escaping from cleaner Tools wont pick up dirtMonday Friday M. 10 p.m. ET Saturday M. 8 p.m. ET Replacement Parts Bissell Cleanview II SeriesMonday Friday Bissell Consumer ServicesWarranty Limited One Year Warranty
Related manuals
Manual 16 pages 26.68 Kb

3576, 3574 specifications

The Bissell 3574 and 3576 models are part of Bissell's line of powerful and versatile carpet cleaners designed for tackling tough stains and maintaining the cleanliness of carpets and upholstery. Both models are praised for their user-friendly design and innovative technology that makes deep cleaning an efficient and thorough process.

One of the standout features of the Bissell 3574 and 3576 is their powerful cleaning system. Equipped with Bissell’s patented Heatwave Technology, these carpet cleaners maintain consistent water temperature throughout the cleaning cycle, which enhances the effectiveness of cleaning solutions. This ensures that dirt and stains are not only lifted but also eliminated, providing a deep clean in less time.

Another key feature is the Dual DirtLifter PowerBrush, which consists of multiple rows of bristles that work in tandem to lift embedded dirt from carpets. This technology ensures that even the most stubborn stains are effectively removed, making it an ideal choice for households with pets or children. The brushes are designed to be gentle on carpets while still delivering a robust cleaning action.

The Bissell 3574 and 3576 also feature a large clean water tank and dirty water tank, which allows for extended cleaning sessions without the need for frequent refills. This is particularly beneficial for larger areas or multiple rooms. The tanks are designed for easy filling and emptying, making the cleaning process more convenient.

The compact and lightweight design of both models enhances their maneuverability, making them easy to carry up and down stairs or around furniture. Additionally, the flexible hose attachment and included tools allow users to clean upholstery, stairs, and hard-to-reach areas with ease.

Both models are equipped with a quick-dry feature, which helps carpets dry faster after cleaning, reducing the downtime before the space can be used again. This is especially important in busy households where time is of the essence.

In conclusion, the Bissell 3574 and 3576 are excellent choices for anyone looking for efficient and effective carpet cleaning solutions. With their advanced technologies, user-friendly design, and versatility, these models stand out as reliable companions in the fight against dirt and stains in carpets and upholstery. Whether you are dealing with everyday spills or tougher stains, these carpet cleaners provide the power and convenience needed to achieve a beautifully clean home.
Top Page Image Contents