Bissell 3574, 3576 warranty How To Put It Together, Select Models Only, Attach Handle To Vacuum

Page 5
Snap the Combination Tool into the storage clip as shown.

How To Put It Together

The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.

Attach Handle To Vacuum

1.Locate the vacuum Handle and remove the screw packet taped to the base of the Handle.

2.Stand the vacuum upright and slide the base of the Handle firmly into the grooves at the top of the

vacuum body.

3.Check to be sure the Handle is fitted to the vacuum body. If there is a gap in front, continue to push firmly

until the Handle is flush.

4. Insert the screw provided from the screw packet into the existing hole. Tighten securely with a screwdriver.

Attach Vacuum Hose and Tools

1.Attach the Twist ‘n Snap™ Hose by lining up the tabs on the base with the corresponding notches on the back of

the vacuum as shown.

2. Turn the Twist ‘n Snap Hose to the right to lock the hose into place.

3. Grasping the Quick Reach Handle, slide the end of the Hose Wand onto the Hose Wand Base. Snap the Hose into the Hose Clip.

NOTE: The Powerfoot will not operate effectively unless the Hose Wand is firmly attached.

4. Snap the Extension Wand and the Crevice Tool together into the storage clip as shown.

5.

6. Attach the TurboBrush® by aligning the small holes near the brush roll with the tabs at the bottom of TurboBrush housing. Snap TurboBrush into place as shown.

Select Models Only

5

ug603-2559_3574-3576_1005.indd 5

1/4/06 9:45:54 AM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 3574/3576 Series CleanViewHow To Use This Guide Thanks For Buying a Bissell CleanViewRisk of fire, electric shock, or injury Important Safety InstructionsCord Clip Hose Clip Select Models Only How To Put It TogetherAttach Handle To Vacuum Attach Vacuum Hose and ToolsHeight Adjustment How To Use Your VacuumTransporting Cleaner HandleSpecial On-Board Tools Power Cord StorageCleaning The Inner & Outer Circular Filters How To Maintain Your VacuumFull Line Empty Dirt ContainerPost-Motor Filter Cleaning the Pre-Motor FilterCheck Rotating Floor Brush and Drive Belt Replacing the Post-Motor FilterUg603-25593574-35761005.indd Large Bulb Belt Cover TurboBrush MaintenanceReplace Lightbulb Clearing ClogsVacuum cleaner won’t pick up dirt Vacuum cleaner won’t runTroubleshooting Louvers Suction Inlet Hose Wand BaseVisible dirt escaping from cleaner Vacuum cleaner is difficult to pushTools wont pick up dirt Possible Causes RemediesMonday Friday M. 10 p.m. ET Saturday M. 8 p.m. ET Replacement Parts Bissell Cleanview II SeriesMonday Friday Bissell Consumer ServicesWarranty Limited One Year Warranty
Related manuals
Manual 16 pages 26.68 Kb

3576, 3574 specifications

The Bissell 3574 and 3576 models are part of Bissell's line of powerful and versatile carpet cleaners designed for tackling tough stains and maintaining the cleanliness of carpets and upholstery. Both models are praised for their user-friendly design and innovative technology that makes deep cleaning an efficient and thorough process.

One of the standout features of the Bissell 3574 and 3576 is their powerful cleaning system. Equipped with Bissell’s patented Heatwave Technology, these carpet cleaners maintain consistent water temperature throughout the cleaning cycle, which enhances the effectiveness of cleaning solutions. This ensures that dirt and stains are not only lifted but also eliminated, providing a deep clean in less time.

Another key feature is the Dual DirtLifter PowerBrush, which consists of multiple rows of bristles that work in tandem to lift embedded dirt from carpets. This technology ensures that even the most stubborn stains are effectively removed, making it an ideal choice for households with pets or children. The brushes are designed to be gentle on carpets while still delivering a robust cleaning action.

The Bissell 3574 and 3576 also feature a large clean water tank and dirty water tank, which allows for extended cleaning sessions without the need for frequent refills. This is particularly beneficial for larger areas or multiple rooms. The tanks are designed for easy filling and emptying, making the cleaning process more convenient.

The compact and lightweight design of both models enhances their maneuverability, making them easy to carry up and down stairs or around furniture. Additionally, the flexible hose attachment and included tools allow users to clean upholstery, stairs, and hard-to-reach areas with ease.

Both models are equipped with a quick-dry feature, which helps carpets dry faster after cleaning, reducing the downtime before the space can be used again. This is especially important in busy households where time is of the essence.

In conclusion, the Bissell 3574 and 3576 are excellent choices for anyone looking for efficient and effective carpet cleaning solutions. With their advanced technologies, user-friendly design, and versatility, these models stand out as reliable companions in the fight against dirt and stains in carpets and upholstery. Whether you are dealing with everyday spills or tougher stains, these carpet cleaners provide the power and convenience needed to achieve a beautifully clean home.
Top Page Image Contents