Bissell 3576, 3574 warranty How To Maintain Your Vacuum, Full Line, Empty Dirt Container

Page 8

How To Maintain Your Vacuum

To maintain maximum cleaning performance, the following maintenance steps must be performed:

1.Empty the Dirt Container when the dirt reaches the “Full” line on the side.

2.Check the Inner and Outer Circular Filters and the Pre-Motor Filter at least once a month and clean or replace as needed.

3.Replace the Post-Motor Filter every three to six months.

Note: More frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.

WARNING:

To reduce the risk of electric shock, turn Power Switch OFF and discon- nect polarized

plug from electrical outlet before performing maintenance or troubleshooting checks.

Tip:

For maximum cleaning performance, check and clean or replace all filters as suggested.

Empty Dirt Container

The Dirt Container needs to be emptied when the dirt reaches the “Full” line on the side of the Container.

1.Unplug cleaner from electrical outlet.

2.Slide the Lock ‘n Seal Lever to the "Unlock" position. Grasp handle and pull the Dirt Container straight out to

3.remove from vacuum.

4.Empty dirt into garbage container.

5.Put the Dirt Container back in the vacuum and slide the lever to the "Lock" position.

Note: The Dirt Container may be washed in warm water with a mild detergent. Remove the Filter Cup from the bottom before washing. Reassemble and make sure it is completely dry before using again.

Full Line

Unlock Lock Position Position

Cleaning The Inner & Outer Circular Filters

Use only BISSELL Style 9 Replacement Filters in your BISSELL CleanView II.

1.Unplug the cleaner from electrical outlet.

2.Remove the Dirt Container as described in the previous section. Grasp the Filter Cup located at the bottom of the Dirt Container and twist counterclockwise to unlock and remove.

3.Grasp the Circular Filters and twist to unlock. Pull straight up to remove.

8

ug603-2559_3574-3576_1005.indd 8

1/4/06 9:45:56 AM

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CleanView 3574/3576 SeriesThanks For Buying a Bissell CleanView How To Use This GuideImportant Safety Instructions Risk of fire, electric shock, or injuryCord Clip Hose Clip How To Put It Together Select Models OnlyAttach Handle To Vacuum Attach Vacuum Hose and ToolsHow To Use Your Vacuum Height AdjustmentTransporting Cleaner HandlePower Cord Storage Special On-Board ToolsHow To Maintain Your Vacuum Cleaning The Inner & Outer Circular FiltersFull Line Empty Dirt ContainerCleaning the Pre-Motor Filter Post-Motor FilterCheck Rotating Floor Brush and Drive Belt Replacing the Post-Motor FilterUg603-25593574-35761005.indd TurboBrush Maintenance Large Bulb Belt CoverReplace Lightbulb Clearing ClogsVacuum cleaner won’t run Vacuum cleaner won’t pick up dirtTroubleshooting Louvers Suction Inlet Hose Wand BaseVacuum cleaner is difficult to push Visible dirt escaping from cleanerTools wont pick up dirt Possible Causes RemediesReplacement Parts Bissell Cleanview II Series Monday Friday M. 10 p.m. ET Saturday M. 8 p.m. ETBissell Consumer Services Monday FridayLimited One Year Warranty Warranty
Related manuals
Manual 16 pages 26.68 Kb

3576, 3574 specifications

The Bissell 3574 and 3576 models are part of Bissell's line of powerful and versatile carpet cleaners designed for tackling tough stains and maintaining the cleanliness of carpets and upholstery. Both models are praised for their user-friendly design and innovative technology that makes deep cleaning an efficient and thorough process.

One of the standout features of the Bissell 3574 and 3576 is their powerful cleaning system. Equipped with Bissell’s patented Heatwave Technology, these carpet cleaners maintain consistent water temperature throughout the cleaning cycle, which enhances the effectiveness of cleaning solutions. This ensures that dirt and stains are not only lifted but also eliminated, providing a deep clean in less time.

Another key feature is the Dual DirtLifter PowerBrush, which consists of multiple rows of bristles that work in tandem to lift embedded dirt from carpets. This technology ensures that even the most stubborn stains are effectively removed, making it an ideal choice for households with pets or children. The brushes are designed to be gentle on carpets while still delivering a robust cleaning action.

The Bissell 3574 and 3576 also feature a large clean water tank and dirty water tank, which allows for extended cleaning sessions without the need for frequent refills. This is particularly beneficial for larger areas or multiple rooms. The tanks are designed for easy filling and emptying, making the cleaning process more convenient.

The compact and lightweight design of both models enhances their maneuverability, making them easy to carry up and down stairs or around furniture. Additionally, the flexible hose attachment and included tools allow users to clean upholstery, stairs, and hard-to-reach areas with ease.

Both models are equipped with a quick-dry feature, which helps carpets dry faster after cleaning, reducing the downtime before the space can be used again. This is especially important in busy households where time is of the essence.

In conclusion, the Bissell 3574 and 3576 are excellent choices for anyone looking for efficient and effective carpet cleaning solutions. With their advanced technologies, user-friendly design, and versatility, these models stand out as reliable companions in the fight against dirt and stains in carpets and upholstery. Whether you are dealing with everyday spills or tougher stains, these carpet cleaners provide the power and convenience needed to achieve a beautifully clean home.
Top Page Image Contents