Bissell 3522 How To Use Your Bissell PowerForce Handle Position, Powerfoot Height Adjustment

Page 6

How To Use Your BISSELL PowerForce

Handle Position

Press the Handle Release Pedal with your foot to place your BISSELL PowerForce into one of three cleaning positions.

1.Upright- For storage and above floor cleaning with special tools.

2.Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks.

3.Low Cleaning- With the vacuum in normal cleaning position press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs and beds.

Powerfoot Height Adjustment

Tip:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.

The Powerfoot/Rotating Floor Brush on your BISSELL PowerForce can be adjusted to clean several floor surfaces.

NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

1.Place Handle in Upright Position.

2.Turn Floor Surface Selector to desired setting. Lowest Setting - For bare floors.

Medium Settings - For short and medium pile carpets. Highest Setting - For plush pile or Berber carpet.

3.Place the Handle into the Normal Cleaning position and the Powerfoot will adjust to the setting chosen.

NOTE: You may also adjust the setting while in the Normal Cleaning Position.

Special Tools

Your BISSELL PowerForce is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools.

1.Raise Handle to Upright Position.

2.Grasp the Quick Reach Handle and lift up to separate from suction intake opening.

3.Attach tools by firmly pushing onto Hose Wand or Extension Wand.

6

CAUTION:

The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the vacuum cleaner with the Carrying Handle at the back of the cleaner. Always place vacuum cleaner on floor with Handle in Upright position when using tools. Never place your fingers under the vacuum cleaner when it is running. Never place Powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough to objects to pull them into rotating brush.

Tip:

Hair, string and small objects can block the Vacuum Hose or Tools. Check them occasionally for obstructions. See Troubleshooting Guide for instructions.

Image 6
Contents PowerForce Thanks For Buying a Bissell PowerForce Important Safety Instructions Risk of fire, electric shock, or injuryCrevice Tool Attach Handle To Vacuum How To Use This GuideHow To Assemble Attach Vacuum Hose and ToolsSpecial Tools How To Use Your Bissell PowerForce Handle PositionPowerfoot Height Adjustment Place Handle in Upright PositionPower Cord Routine MaintenanceIndicator Bag Change IndicatorFilter Never reuse a Dust BagPre-Motor Replace Dust BagCheck Rotating Floor Brush and Drive Belt Motor Pulley Air PassagewaySmall Bulb Brush Cover Large Bulb Replace Drive BeltVacuum cleaner won’t pick up dirt Possible Causes Vacuum cleaner won’t runTroubleshooting Possible Causes RemediesReplacement Parts Bissell PowerForce Tools wont pick up dirtWarranty Limited One Year WarrantyBissell Consumer Services If your Bissell product should require service