How to use this guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL PowerClean Upright Vacuum Cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.
Pay particular attention to the assembly diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL PowerClean for many years.
How to put it together
The only tool you’ll need to assemble your vacuum
cleaner is a Phillips head | screwdriver. |
Attach Vacuum Body to Powerfoot
1. Place Powerfoot on floor with rotating agitator brush on floor surface.
Place Vacuum Body onto Powerfoot and push down firmly on
2. top corners of Vacuum Body while rocking slightly from side to side. You will hear a ‘click’ when raised area on back of Powerfoot enters opening on back of Vacuum Body.
3. Push long bolt through bottom hole on FRONT of lower body. Place nut over end of bolt and hold in place while tightening
bolt with a phillips head screwdriver.
NOTE: If bolt will not go through hole easily, repeat step 1.
Attach Handle to Vacuum Body
4. Align Handle with edges of upper Vacuum Body and press down. You will hear it snap into place.
WARNING:
Plastic bags or plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
4