Bissell 21R9 warranty Assembly, Operation, Quick and easy assembly, Power switch

Page 5

Assembly

Quick and easy assembly

1.To assemble the handle connect all three handle sections by connecting the base of one section to the top of another. Repeat with remaining two sections.

2.Attach the handle grip by connecting handle grip to assembled handle.

3.Connect assembled handle and grip to base of unit by inserting handle into base until it snaps into place.

Operation

 

Power switch

 

Power button is red and located on back left

 

hand side of unit.

 

To turn unit on, press red power button once

 

with foot.

Power

To turn unit off, press red power button once

Button

more with foot.

 

How to use your cordless vacuum

 

The cordless bare floor vacuum is a quick and easy way to clean your bare floors and low pile carpets.

1.Detent by holding base steady with one foot and tip handle back.

2.Gently tap red power button on base with your foot to turn unit on.

3.Clean along edges, in corners, and around tables and chairs by lining unit up along surface you want to clean.

4.When finished cleaning, tap red power button on base with your foot to turn unit off.

5.To properly store, return handle to upright position.

6.Recharge if needed.

Note: The cordless bare floor vacuum has a 360 degree swivel handle. To store properly, make sure handle has rotated back to its original position.

w w w . b i s s e l l . c o m

ug110-4044_21R9_408.indd 5

8 0 0 . 2 3 7 . 7 6 9 1

5

5/30/08

10:30:16 AM

Image 5
Contents E R ’ S G U I D E VersusW w . b i s s e l l . c o m Important Safety Instructions Product view Quick and easy assembly AssemblyPower switch How to use your cordless vacuumTo reassemble, snap filter assembly back into dirt cup Maintenance and careDirt cup should be emptied after each use Make sure cordless bare floor vacuum is turned OFFUnplug unit from electrical outlet. Ensure power is OFF Brush and wiper maintenanceClearing clogs To remove wipers, slide old wiper out and insert new wiperPlug charging cord into charging port Charging the batteryPower switch must be in the OFF position when charging Cordless bare floor vacuum will not turn on TroubleshootingCordless bare floor vacuum won’t pick up or low suction Handle will not store properlyPO Box Grand Rapids MI Attn Consumer Services Bissell Consumer ServicesM. 10 p.m. EST M. 8 p.m. ESTDirt Cup Assembly Charger Handle Assembly Wiper Brush Replacement parts203-0189 203-0190If your Bissell product should require service Warranty Bissell V. Versus Cordless Bare Floor VacuumLimited One Year Warranty