Assembly

Features

This appliance includes some or all of the following features.

1.Hose

2.Container handle

3.Filter cleaning switch (not VN1800N)

4.On/off switch

5.Handle

6.Cord rewind button

7.Suction head

8.Wheels

9.Container

10.Extension tube

11.Airflow control switch

In addition, this appliance is supplied with some or all of the following accessories (fig. A):

12.Crevice tool

13.Brush tool

14.Parquet floor head (VN2010 / VN2200 / VN2400)

15a.Large turbo brush (VN1800T / VN2200 / VN2205 / VN2400)

15b.Mini turbo brush (VN2000C)

The parquet floor head is not included with all models. This accessory is available from your Black & Decker dealer / service centre (cat. no. WV100).

The large turbo brush is not included with all models. This accessory is available from your Black & Decker dealer / service centre (Cat. No. WV200).

The mini turbo brush is not included with all models. This accessory is available from your Black & Decker dealer / service centre (Cat. No. WV300).

Connecting the hose (fig. A)

Insert the hose connector (16) into the inlet (17) of the appliance.

Line up the hose connector tabs with the slots in the inlet. Slide the hose further until the release buttons (18) (2 positions) click into place.

To disconnect the hose, press the release buttons (18) (2 positions) and pull out the hose.

Mounting the extension tube (fig. A)

Press the lock button (19) and slide the hose nozzle (20) into the tube (10) until it clicks into place.

To remove the tube (10), press the lock button and pull the hose nozzle (20) out of the tube.

Mounting the suction head (fig. A)

The suction head (7) allows for vacuuming on carpet and hard surfaces (e.g. laminate and tiles).

Press the lock button (21) and slide the tube (10) into the head (7) until it clicks into place.

To remove the head (7), press the lock button (21) and pull the tube (10) out of the head (7).

VN2010 / VN2200 / VN2400 - Mounting the parquet floor head (fig. A)

The parquet floor head (14) allows for vacuuming on wooden and polished surfaces.

Press the lock button (21) and slide the tube (10) into the head (14) until it clicks into place.

To remove the head (14), press the lock button (21) and pull the tube (10) out of the head.

VN1800T / VN2200 / VN2205 / VN2400 - Mounting the large turbo brush (fig. A)

The large turbo brush (15a) allows for vacuuming on cut pile carpeting.

The brush is particularly useful for picking up hair, threads, etc., as well as for refreshing trodden-down carpet pile.

Press the lock button (21) and slide the tube (10) into the head (15a) until it clicks into place.

To remove the head (15a), press the lock (21) button and pull the tube (10) out of the head.

VN2000C - Mounting the mini turbo brush (fig. A)

The mini turbo brush (15b) allows for vacuuming on cut pile carpeting and is especially ideal for stair cleaning.

The brush is particularly useful for picking up hair, threads, etc., as well as for refreshing trodden-down carpet pile.

Press the lock button (21) and slide the tube (10) into the head (15b) until it clicks into place.

To remove the head (15b), press the lock (21) button and pull the tube (10) out of the head.

Mounting accessories (fig. A)

The crevice tool (12) allows for vacuuming in narrow and hard to-reach places. The brush tool (13) allows for vacuuming on furniture, blinds, curtains, windows and stairs. The accessories can be mounted on both the hose (1) and the tube (10).

Press the lock button (19 or 21) and slide the accessory onto the hose nozzle (20) or the tube (10).

To remove an accessory, press the lock button (19 or 21) and pull the accessory off.

When not in use, the accessories can be stored on the accessory holder (22). The accessory holder is stored on the hose nozzle. This is clipped into place, to remove pull way from the hose nozzle. The tools are stored as shown in fig. A.