Troubleshooting, 110 dB, Warranty Procedure

TROUBLESHOOTING			Before Requesting Service Review These Suggestions
Problem		Possible Cause		Solution
Engine will not start.	- Battery is low or dead.			- Charge battery or replace if the battery does not hold charge.
Engine will not start.	- Battery is low or dead.
(starter does not turn)	- Battery cable is disconnected or battery terminal is corroded.			- Clean battery terminal and cable then reconnect.
	- Hose coupler is	not installed, allowing interlock switch to operate.		- Install hose coupler securely to the unit and check whether
				interlock switch is engaged by lever.
	- Harness wire is bad or disconnected from interlock switch.			- Check harness wire connection and replace if necessary.
Engine will not start.	- Throttle stop switch in idle position.			- Check throttle.
(starter turns)	- Out of gasoline.	Bad or old gasoline.		- Check gasoline, Replace if gasoline is old.
	- Spark Plug wire disconnected.			- Connect spark plug wire.
	- Dirty air cleaner.			- Clean or replace air cleaner. Or contact a qualified service person.

Will not vacuum or has poor	Nozzle height too high or too low. Clogged hose or exhaust.			Adjust nozzle position. Unclog hose or exhaust (see page 6).
vacuum performance.	Excessive quantity of debris.			Allow air to feed with debris.

Abnormal vibration.	Loose or out of balance impeller or loose engine.			Check impeller and replace if required. Check Engine.

Engine is locked, will not	Debris locked inside impeller. Engine problem.			See page 6, Clearing a clogged impeller housing. Contact an engine
turn over.				servicing dealer for engine problems.

Engine Service and Warranty

Contact your nearest engine manufacturer's authorized

servicing dealer.

	Serial Plate	Record your machine model, serial number
	Serial Plate	and date-of-purchase and where purchased
		and date-of-purchase and where purchased

	1803 S. Jefferson
	P.O. Box 308
	Lee's Summit,
	MO	64063 / USA
R	Tel (816) 524-9666

	Fax (816) 524-6983

Model

Serial No.

110 dB

Unit(Weight)

Engine Power

lbs.

rpm

min-1

Purchase Purchased

Datefrom

WARRANTY PROCEDURE

Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the user. Whenever a Billy Goat Machine is faulty due to a defect in material and / or workmanship, the owner should make a warranty claim as follows:

The Machine should be taken to the dealer from whom it was purchased or to an authorized Billy Goat dealer.

The owner should present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

The Warranty Claim will be filled in by the authorized Billy Goat Dealer, who will send it with the faulty part to Billy Goat headquarters.

The Quality / Service department at Billy Goat headquarters will study the claim and parts and will notify their conclusions.

The decision by the Quality / Service department at Billy Goat headquarters to approve or reject a Warranty claim is final and binding.

Note: To process a Warranty Claim, it is necessary to quote the Model & Serial number who are printed on the Billy Goat Serial Plate.

BILLY GOAT INDUSTRIES INC.

1803 S.W. JEFFERSON STREET / LEE'S SUMMIT, MO 64082-2312 / USA

PHONE: 816-524-9666 FAX: 816-524-6983

www.billygoat.com

Part No. 790321

Page 12 of 12

Form No. F050304B

QL2300KOEU specifications

The Billy Goat QL2300KOEU is a robust pressure washer designed for both residential and commercial applications, making it an ideal choice for users who require high performance and durability. With a powerful Honda engine at its core, the QL2300KOEU delivers impressive cleaning capabilities, allowing it to tackle even the toughest grime and stains.

One of the standout features of the QL2300KOEU is its compact design, which ensures portability without sacrificing power. Weighing in at a manageable level, this pressure washer allows for easy maneuverability around driveways, patios, and large surfaces. The ergonomic handle and wheels provide added convenience, making it suitable for both casual users and professionals.

This model boasts an impressive maximum pressure of 2300 PSI, enabling effective removal of dirt, moss, and mildew from various surfaces. The inclusion of multiple nozzle types allows users to adjust the pressure to suit different cleaning tasks, from gentle washing of vehicles to heavy-duty cleaning of concrete surfaces. The Quick Connect feature makes switching nozzles easy, enhancing user experience.

Furthermore, the QL2300KOEU is equipped with a robust pump that is designed for longevity and efficiency. Built with high-quality materials, it minimizes the risk of leaks and maintains consistent pressure throughout the cleaning process. The pump also features an integrated thermal relief system that protects it from overheating, ensuring reliable operation even during extensive cleaning tasks.

Safety is paramount, and the QL2300KOEU includes several features to protect the user. The design incorporates a thermal relief valve to prevent overheating and a safety latch to avoid accidental start-ups.

The ease of maintenance is another notable characteristic of the QL2300KOEU. Its straightforward design allows for simple access to key components, making routine checks and servicing hassle-free.

In conclusion, the Billy Goat QL2300KOEU stands out as a powerful and efficient pressure washer, equipped with user-friendly features and advanced technologies. Its combination of performance, portability, and safety makes it a worthy investment for anyone in need of effective cleaning solutions, while its durable construction ensures it will withstand the test of time.