Billy Goat MV600SPE owner manual Reconnect Spark Plug, Drive Belt Removal and Replacement

Page 16

MV650SPH Self-Propelled Vacuum Owner’s Manual

Procedure:

1.Wait for engine to cool and DISCONNECT SPARK PLUG!

2.Engage the clutch lever then pull the unit back until it stops freewheeling. The clutch lever should engage around 2 5/16” of travel or 4 inches from tip of lever to handle.

3.Tighten or loosen cable adjuster nut next to the clutch lever until drive engages at 4” from handle.

4.Holding the adjuster nut in place with one wrench tighten cable lock nut firmly.

5.Readjust as needed.

6.RECONNECT SPARK PLUG!

7.Test run unit to insure proper operation after this or any other maintenance procedure.

8.If clutch still will not engage at 4” from handle, remove guard retaining screws and guard.

9.Measure the amount of spring stretch. Spring should measure 1 1/8” when engaged (Lever 4” from handle).

10.Release clutch lever and then move it to engagement position again and hold it, check the spring length to assure it stayed in adjustment.

11.Re-install guard and fasteners.

 

cable adjustment

 

 

2 1/16”

Loosen

 

4"

Tighten

1 1/8"

from

handle

 

DRIVE BELT REMOVAL AND REPLACEMENT

READ all safety instructions before servicing unit.

DISCONNECT spark plug wire before servicing unit.

Tools required:

-3/8” drive ratchet

-3/8” and ½” socket wrenches

-3/8” and 5/16” wrench Procedure:

1.Wait for engine to cool completely and DISCONNECT SPARK PLUG.

2.Remove guard fasteners and guard.

3.Remove throttle control cable from engine.

4.Unplug wiring harness wire at engine.

5.Tilt transmission input pulley toward engine and remove the belt from it upward.

6.Remove all six screws fastening the engine base plate to the housing.

7.Lift engine assembly from housing.

8.Slide belt inward under the engine and off downward around impeller.

9.Install new belt in reverse order of belt removal.

10.Note: before placing new belt on transmission pulley look under the engine to insure the belt is properly in the groove of the engine pulley.

11.Install engine assembly in reverse order of removal.

12.RECONNECT THE SPARK PLUG

Part No 840245

16

Form No F060711D

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Accessories Contents Sound Data MV 650 Series SpecificationsVibration Data Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator ControlsVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGMaintenance Periodic MaintenanceCommon Replacement Parts LocationDrive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsIllustrated Parts List Nozzle Assembly Parts List Part MV650SPH MV600SPE Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH MV600SPE Number DescriptionHood Assembly Hood Assembly

MV600SPE specifications

The Billy Goat MV600SPE is a powerful and versatile machine designed for various outdoor tasks, particularly in the realms of lawn care and landscaping. This walk-behind blower is recognized for its robust performance, ease of use, and innovative features that make it a favorite among professionals and homeowners alike.

At the heart of the MV600SPE is its 6.5 horsepower engine, which delivers exceptional airspeed and volume. With a maximum air velocity of up to 200 miles per hour and an air volume of 600 cubic feet per minute, this blower is capable of handling even the most demanding cleanup jobs. Whether you're dealing with leaves, debris, or grass clippings, the MV600SPE offers the power needed to clear your yard quickly and efficiently.

One of the standout features of the MV600SPE is its self-propelled drive system. This technology allows users to effortlessly navigate through their yard or job site without having to exert excessive physical effort. The adjustable speed settings enable the operator to control the pace of the machine, making it suitable for different terrains and conditions. The self-propelled feature paired with large rear wheels provides excellent maneuverability, allowing users to easily navigate tight corners and uneven surfaces.

The MV600SPE is designed with a focus on operator comfort and convenience. The ergonomic handle is adjustable, allowing users to customize their grip position for optimal comfort during extended use. This consideration for user comfort extends to the lightweight construction of the blower, which minimizes fatigue and strain on the operator.

Another notable characteristic of the MV600SPE is its durable construction. Built with high-quality materials, this machine is designed to withstand the rigors of outdoor use. The heavy-duty housing ensures longevity and resistance against wear and tear, making it a reliable investment for years to come.

In addition to its impressive performance, the MV600SPE is equipped with advanced features such as an easy-to-access fuel tank and an efficient air filtration system that enhances engine performance by keeping dirt and debris at bay. This combination of power, efficiency, and convenience positions the MV600SPE as a top choice for anyone looking to maintain a pristine outdoor space. Whether for commercial landscaping or residential upkeep, the Billy Goat MV600SPE offers unmatched performance and reliability.
Top Page Image Contents