Billy Goat MV600SPE owner manual Impeller Removal, Drive Clutch Cable Adjustment

Page 15

MV650SPH Self-Propelled Vacuum Owner’s Manual

IMPELLER REMOVAL

READ all safety instructions before servicing unit.

DISCONNECT spark plug wire before servicing unit.

Tools required:

-1/2” socket, 3/8” drive

-ratchet, 3/8”

-drive extension, 3/8” drive

-universal joint, 3/8” drive

-pry bar or long screwdriver

-jack stands or similar device adequate to support weight of machine.

1.Wait for engine to cool and disconnect spark plug.

2.Drain fuel and oil from the engine.

3.Remove belt cover by removing 5 screws.

4.Detach drive belt from the transmission pulley by rotating the transmission assembly to relieve belt tension.

5.Remove engine, impeller and mounting plate by removing bolts around outside of housing.

6.Leaving engine fastened to plate, remove impeller bolt and lock washer and slide impeller off crankshaft ( A puller may be required). CAUTION: Do not drop impeller.

7.If impeller does not slide off crankshaft, place two crowbars between impeller and housing on opposite sides. Pry impeller away from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller.

8.If the impeller cannot be loosened, obtain a 1” (25.4mm) longer bolt of the same diameter and thread type as the impeller bolt. Invert engine and impeller and support engine above ground to prevent recoil damage. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft.

9.To reinstall impeller, use a new impeller bolt and lockwasher

10.Tighten impeller bolt. Torque impeller bolt to 33-38 Ft. Lbs. (45-52 N.m).

11.Reinstall engine, impeller, and mounting plate onto housing in reverse order of removal.

12.Before connecting spark plug wire, slowly pull engine starting rope to insure that impeller rotates freely.

13.Reconnect spark plug wire.

DRIVE CLUTCH CABLE ADJUSTMENT

READ all safety instructions before servicing unit.

DISCONNECT spark plug wire before servicing unit.

Tools required:

-Ratchet wrench with 6” extension and 3/8” socket.

-Two 10mm open end wrenches.

-Tape measure.

Form No F060711D

15

Part No 840245

Image 15
Contents Accessories Contents MV 650 Series Specifications Sound DataVibration Data Engine Labels Instruction LabelsMV Vacuum Assembly Drawing Parts List 1st Assembly InstructionsHere Operator Controls OperationVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Shut Down Vacuuming OperationDebris BAG Clearing a Clogged NozzleLocation MaintenancePeriodic Maintenance Common Replacement PartsImpeller Removal Drive Clutch Cable AdjustmentReconnect Spark Plug Drive Belt Removal and ReplacementImproper Chain Tension Installing NEW Drive CHAIN/ALIGNMENT/TENSIONWiring Diagrams TroubleshootingIllustrated Parts List Part MV650SPH MV600SPE Item no Number Description QTY Nozzle Assembly Parts ListDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Part MV650SPH MV600SPE Number Description Engine Assembly Parts ListHood Assembly Hood Assembly

MV600SPE specifications

The Billy Goat MV600SPE is a powerful and versatile machine designed for various outdoor tasks, particularly in the realms of lawn care and landscaping. This walk-behind blower is recognized for its robust performance, ease of use, and innovative features that make it a favorite among professionals and homeowners alike.

At the heart of the MV600SPE is its 6.5 horsepower engine, which delivers exceptional airspeed and volume. With a maximum air velocity of up to 200 miles per hour and an air volume of 600 cubic feet per minute, this blower is capable of handling even the most demanding cleanup jobs. Whether you're dealing with leaves, debris, or grass clippings, the MV600SPE offers the power needed to clear your yard quickly and efficiently.

One of the standout features of the MV600SPE is its self-propelled drive system. This technology allows users to effortlessly navigate through their yard or job site without having to exert excessive physical effort. The adjustable speed settings enable the operator to control the pace of the machine, making it suitable for different terrains and conditions. The self-propelled feature paired with large rear wheels provides excellent maneuverability, allowing users to easily navigate tight corners and uneven surfaces.

The MV600SPE is designed with a focus on operator comfort and convenience. The ergonomic handle is adjustable, allowing users to customize their grip position for optimal comfort during extended use. This consideration for user comfort extends to the lightweight construction of the blower, which minimizes fatigue and strain on the operator.

Another notable characteristic of the MV600SPE is its durable construction. Built with high-quality materials, this machine is designed to withstand the rigors of outdoor use. The heavy-duty housing ensures longevity and resistance against wear and tear, making it a reliable investment for years to come.

In addition to its impressive performance, the MV600SPE is equipped with advanced features such as an easy-to-access fuel tank and an efficient air filtration system that enhances engine performance by keeping dirt and debris at bay. This combination of power, efficiency, and convenience positions the MV600SPE as a top choice for anyone looking to maintain a pristine outdoor space. Whether for commercial landscaping or residential upkeep, the Billy Goat MV600SPE offers unmatched performance and reliability.