Billy Goat MV600SPE owner manual Troubleshooting, Wiring Diagrams

Page 18

MV650SPH Self-Propelled Vacuum Owner’s Manual

WIRING DIAGRAMS

Bag Switch Circuit Schematic Diagram

TROUBLESHOOTING

Problem

Possible Cause

Solution

Will not vacuum or has poor vacuum

· Dirty or full debris bag or filter.

· Clean debris bag and filter. Shake bag clean or

performance.

 

wash.

 

· Nozzle height set too high or too low.

· Adjust nozzle height (see page 14).

 

· Hose kit cap missing.

· Check for hose kit cap.

 

· Clogged nozzle or exhaust.

· Unclog nozzle or exhaust (see page 5)

 

· Excessive quantity of debris.

· Allow air to feed with debris.

 

 

 

Abnormal vibration.

· Loose or out of balance impeller.

· Check impeller and replace if required.

 

· Loose engine.

· Check engine.

 

 

 

Engine will not start.

· Throttle in off position.

· Check throttle control (see page 13).

 

· Engine not in full choke position.

· Check throttle, choke position (see page 13).

 

· Out of gasoline or bad, old gasoline.

· Check gasoline.

 

· Spark Plug wire disconnected.

· Connect spark plug wire.

 

· Gas valve off.

· Turn on gas valve.

 

· Dirty air cleaner.

· Clean or replace air cleaner. Contact a qualified

 

 

service person.

 

· Safety Interlock disengaged on bag plate.

· Latch the bag properly or check the bag rod to

 

 

see if it is bent.

 

 

 

Engine is locked, will not pull over.

· Impeller plugged or clogged.

· Remove debris (see page 16).

 

· Engine problem.

· Contact an engine servicing dealer for engine

 

 

problems.

No self-propelling

· Drive clutch not engaged

· Engage the drive clutch lever.

 

· Transmission not in gear.

· Check transmission shift control (see page 16).

 

· Drive belt worn or broken

· Check the drive belt.

 

· Drive clutch cable out of adjustment or broken.

· Check the drive clutch cable (see page 20).

 

· Spring tension too loose

· Check spring legnth (see page 20).

 

· Drive chain off the sprocket.

· Check the drive chain (see page 22).

 

 

 

Self propelled drive will not release

· Improper drive clutch cable adjustment or

· Check the drive clutch cable (see page 20).

 

cable is kinked.

 

Noisy or broken chain

· No chain lubrication.

· Lubricate chain.

 

· Chain misalignment or tension.

· Check the drive chain (see page 22).

 

 

 

Part No 840245

18

Form No F060711D

Image 18
Contents Accessories Contents MV 650 Series Specifications Sound DataVibration Data Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator ControlsVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Vacuuming Operation Shut DownClearing a Clogged Nozzle Debris BAGCommon Replacement Parts MaintenancePeriodic Maintenance LocationDrive Clutch Cable Adjustment Impeller RemovalDrive Belt Removal and Replacement Reconnect Spark PlugInstalling NEW Drive CHAIN/ALIGNMENT/TENSION Improper Chain TensionTroubleshooting Wiring DiagramsIllustrated Parts List Nozzle Assembly Parts List Part MV650SPH MV600SPE Item no Number Description QTYDrive /Rear Axle Assembly Drive /Rear Axle Assembly Parts List Engine Assembly Engine Assembly Parts List Part MV650SPH MV600SPE Number DescriptionHood Assembly Hood Assembly

MV600SPE specifications

The Billy Goat MV600SPE is a powerful and versatile machine designed for various outdoor tasks, particularly in the realms of lawn care and landscaping. This walk-behind blower is recognized for its robust performance, ease of use, and innovative features that make it a favorite among professionals and homeowners alike.

At the heart of the MV600SPE is its 6.5 horsepower engine, which delivers exceptional airspeed and volume. With a maximum air velocity of up to 200 miles per hour and an air volume of 600 cubic feet per minute, this blower is capable of handling even the most demanding cleanup jobs. Whether you're dealing with leaves, debris, or grass clippings, the MV600SPE offers the power needed to clear your yard quickly and efficiently.

One of the standout features of the MV600SPE is its self-propelled drive system. This technology allows users to effortlessly navigate through their yard or job site without having to exert excessive physical effort. The adjustable speed settings enable the operator to control the pace of the machine, making it suitable for different terrains and conditions. The self-propelled feature paired with large rear wheels provides excellent maneuverability, allowing users to easily navigate tight corners and uneven surfaces.

The MV600SPE is designed with a focus on operator comfort and convenience. The ergonomic handle is adjustable, allowing users to customize their grip position for optimal comfort during extended use. This consideration for user comfort extends to the lightweight construction of the blower, which minimizes fatigue and strain on the operator.

Another notable characteristic of the MV600SPE is its durable construction. Built with high-quality materials, this machine is designed to withstand the rigors of outdoor use. The heavy-duty housing ensures longevity and resistance against wear and tear, making it a reliable investment for years to come.

In addition to its impressive performance, the MV600SPE is equipped with advanced features such as an easy-to-access fuel tank and an efficient air filtration system that enhances engine performance by keeping dirt and debris at bay. This combination of power, efficiency, and convenience positions the MV600SPE as a top choice for anyone looking to maintain a pristine outdoor space. Whether for commercial landscaping or residential upkeep, the Billy Goat MV600SPE offers unmatched performance and reliability.