Breville BJE820XL manual Troubleshooting, Machine will not work, When switched on, When juicing

TROUBLESHOOTING

POSSIBLE PROBLEM	EASY SOLUTION
	• The safety locking arm may not be correctly
	engaged in the vertical operating position with the
	locking arm located into the two grooves on either
	side of the juice cover (see picture on page 14,
	step 4).
Machine will not work	• Check the Overload Protection Button on the
	bottom of the Motor Base to check if the safety
when switched “ON”
	device has not been activated. (see Note 3. on
	page 20 ‘Operating your juicer’)
	The Overheating protection device has not been
	activated automatically, allow more time for the
	motor to cool down (see Note 1. on page 20
	‘Operating your juicer’).
	• Wet pulp can build up under the cover if the
	juicing action is too vigorous. Try slower juicing
	action by pushing the food pusher down more
	slowly. Clean the Filter Bowl Surround, the juice
	disc and the juicer cover. Select speed 5 instead
	of the speed 1 setting.
	• The Breville Dual Disc Juice Processor™ will
	automatically stop operating if the motor is
	stalled. This is a electronic safety feature. Either
	too much food is being processed at one time
	or the pieces are not small enough. Try trimming
Motor appears to stall	food, cutting food into smaller pieces of even size
when juicing	and/or processing a smaller amount per batch. If
	this occurs, the light surrounding the Start/Stop
	button will flash red.
	To continue juicing, reset the Juicer by pressing
	the Start/Stop button to ”Off”, then clear the
	feed chute, finally turn the appliance back on by
	pressing the Start/Stop button to “ON”.
	• Hard fruits and vegetables will put excess strain
	onto the motor if a low speed is selected. Please
	refer to the juicing guide on Page 15, to determine
	the correct speed for the fruits and vegetables
	selected on juicing.

30