Breville BJE820XL manual Juicer suddenly, Switches off during, Juicing, Red light flashing

TROUBLESHOOTING

POSSIBLE PROBLEM	EASY SOLUTION
	• The juicer has been stressed by overloading
	or stalling. Juicer will automatically activate the
	overload protection button and the unit will switch
Juicer suddenly	itself off. When this happens it is recommended
	that the unit is switched off at the power outlet
switches off during
	and unplugged. Then press the Overload
juicing
	Protection Button found on the bottom of the
	Motor Base. The safety device will then be reset
	and the Breville Juice Processor is ready for
	use again.
	• This may indicate that the motor has been stress
	by Overheating with excessive load. The Juicer
	is fitted with a self-resetting safety device which
	safeguards against overheating on the motor
	with excessive loads. If overheating occurs, the
	juicer will automatically activate the overheating
	protection device and the motor will switch itself
	off. When the overheating protection is activated,
	unplug the juicer from power outlet for at least
	15 minutes to allow the unit to cool. Then plug
	juicer into the power outlet and use as normal.
Red light flashing	• The Juicer will automatically stop operating
	if the motor is stalled. If this occurs, the light
	surrounding the Start/Stop button will flash red.
	This is an electronic safety feature. Either too
	much food is being processed at one time or the
	pieces are not small enough. Try trimming food,
	cutting food into smaller pieces of even size and/
	or processing a smaller amount per batch. To
	continue juicing, unplug the juicer from power
	outlet, reset the Juicer by pressing the Start/Stop
	button to ”Off”, then clear the feed chute, finally
	turn the appliance back on by pressing the Start/
	Stop button to “ON”.

32