Nikon COOLPIXP7700BLK manual Troubleshooting

Troubleshooting

Problem	Cause/Solution	A
	• If the camera clock has not been set (“Date not set” indicator	24, 110,
	flashes during shooting), still pictures have a time stamp of	E69
Date and time of	“00/00/0000 00:00”; and movies are dated “01/01/12 00:00.” Set
	the correct date and time using Time zone and date in the
recording are not
	setup menu.
correct.
	• The camera clock is not as accurate as a normal clock, such as	110,
	watches. Check camera clock regularly against more accurate	E69
	timepieces and reset as required.
No information	Shooting and photo information may be hidden. Press the s
displayed in	button until shooting information or photo information is	9
monitor.	displayed.
Print date not	Time zone and date in the setup menu has not been set.	24, 110,
available.		E69
Date not	• A shooting mode that does not support print date is selected.
appearing on		110, E72
pictures even	• Another function that is set now is restricting the print date.	79
when Print date is	• The date cannot be imprinted onto a movie.	–
enabled.
Screen for setting
time zone and
date is displayed	Clock battery is exhausted; all settings were restored to their
when camera is		25
	default values.
turned on.
Camera settings	Reset file numbering cannot be applied when the folder	113,	Technical
Reset file
reset.
numbering	number reaches 999 and there are images in the folder. Change	E87	Notes
cannot be done.	the memory card, or format the internal memory/memory card.
Monitor is turned	Battery temperature is high. Turn off camera, and allow battery to		and
off, and the power-	cool down before resuming use. After the lamp flashes for 3	23
on lamp flashes	minutes, the camera turns off automatically, but you can also		Index
quickly.	press the power switch to turn it off manually.
Camera	When functions such as movie recording or sending images
	using an Eye-Fi card are used for a long time, or when the camera	103
temperature rises.	is used in a location with a high ambient temperature, the
	camera temperature may rise. This is not a malfunction.

F3