Nikon COOLPIXP7700BLK manual Changing A, B, C, DModes, Control Range of the Shutter Speed

A, B, C, DModes (Setting the Exposure for Shooting)

BNotes on Shooting

•When zooming is performed after the exposure is set, exposure combinations or aperture value may be changed.

•When the subject is too dark or too bright, it may not be possible to obtain the appropriate exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the shutter-release button is pressed halfway (except when the Dmode is used). Change the shutter speed setting or aperture value. When settings such as Built-in ND filter (A72) or ISO sensitivity (A68) are changed, the appropriate exposure may be obtained.

BNote on ISO Sensitivity

When ISO sensitivity (A68) is set to Auto (default setting), ISO 80-200, ISO 80-400or ISO 80- 800, the ISO sensitivity in Dmode is fixed at ISO 80.

CControl Range of the Shutter Speed

The control range differs depending on the aperture value, ISO sensitivity or continuous shooting setting. See “The Control Range of the Shutter Speed“ (A82) for more information.

CMore Information

See “Customize command dials” (A112) for more information.

Changing A, B, C, DModes

•Features That Can Be Set Using the Multi Selector ➝ A55

•Exposure Compensation ➝ A66

•Features That Can Be Set Using the Quick Menu Dial ➝ A67

•Features That Can Be Set Using the d(Menu) Button

-Shooting menu ➝ A71

-Setup menu ➝ A110

Shooting Features

51