Elmo HV-3000XG instruction manual Function, Parameter, Data, Comments

Function	Command	Parameter		Data	Comments
Pause	FZ	0	(OFF)		Command to pause the image.
		1	(ON)
Local lockout	LL	0	(OFF)		Command to invalidate the switches on the front operation
		1	(ON)		panel and wireless remote control.
Gamma	GM	0 (1.0)			Command to switch the gamma setting value of the image.
selection		1 (0.6)
Aparture	AP	0	(OFF)		Command to switch the sharpness (edge effect) of the image.
selection		1	(ON)
Default	DF	0			Command to reset to the initialized mode.
Status request	QS	0			Command to inquire the status of the equipment.
		2
ROM version	QR	0			Command to refer to the ROM version.
Acknowledge	SA	0	(OFF)		Command to select the command acknowledge for each
check		1	(ON)		operation command. (Default :ON)
Add CR	SC	0	(OFF)		Command to add CR [0Dh] to the end of the acknowledge
command		1	(ON)		data. (Default :OFF)

Note: " " in the data column means that SPACE [20H] should be transmitted twice.

27