6.STORING THE VISUAL PRESENTER
(1)Turn OFF the power switch, and unplug the power cord and the video cable.
(2)Close the lighting unit and the lighting arm unit.
(3) Turn the lighting unit to the position shown in the right figure.
Note: Be sure to return the lighting unit to its original position as shown in the right figure. If it is in any other position when it is put away, the lighting unit may be damaged.
(4) Fall the lighting arm (R) unit, and turn the camera head to the position shown in the right figure (the position with the camera head slightly turned to the rear side panel).
Note: The lighting arm (L) cannot be independently fallen.
Note: Be sure to return the camera to its original position as shown in the right figure. If it is in any other position when it is put away, the camera head or the lens may be damaged.
(5) Raise up the column once, and then fall it.
Note: The right storage position of the column is shown in the right figure. Never apply excessive force to the column.
Note: Do not hold the head arm unit when carrying the Presenter.
16
