Nikon COOLPIXP7700BLK manual Set the NRW RAW processing parameters, E17

Editing Still Images

2 Set the NRW (RAW) processing parameters.

•Apply the settings below while checking the image and rotating the zoom control toward g(i). Rotate toward g(i) again to return to the setting screen.

-White balance: Adjust the white balance setting (E33).

-Exp. +/-: Adjust the brightness.

NRW (RAW) processing
EXE
Reset	Check

-Picture Control: Change the settings for finish of the image (E38).

-Image quality: Set the image quality to Fine or Normal (A75).

-Image size: Choose an image size (A77). The image is cropped if I3984×2656, u3968×2232 or H3000×3000 is selected.

-Distortion control: Set the distortion control (E53).

-D-Lighting: Enhance brightness and contrast in dark portions of pictures (E12).

•Press the lbutton to change back to the default settings.

•Choose EXE when all settings have been adjusted.

3 Choose Yes and press the kbutton.

•An NRW (RAW) processed JPEG image is created.

Create a JPEG copy at these settings?

Yes

No

Reference

BNotes on NRW (RAW) Processing

•The COOLPIX P7700 can only create JPEG-format copies of NRW (RAW) images taken with the COOLPIX P7700.

•NRW (RAW) processing > White balance > Preset manual cannot be selected for photographs taken at a White balance setting other than Preset manual.

•The Noise reduction filter (E52) that was set for shooting a picture is applied to the JPEG images to be created.

CMore Information

See “Printing Images of Size 1:1” (A78) for more information.

Section

E17