Nikon COOLPIXP7700BLK Setup Menu, 110, Panorama assist, or 3D photography, Self-timer mode

General Camera Setup

The Setup Menu

Press the dbutton Mz(setup) tab (A11)

From the menu screen, select the z tab to display the setup menu, and then you can change the following settings.

Set up

Welcome screen

Time zone and date

Monitor settings

Print date

Self-timer: after release

Vibration reduction

AF assist

	Option	Description	A
	Welcome screen	Set whether or not the welcome screen is displayed
		when power is turned on. The welcome screen image	E68
		can be selected.
		Set settings related to the camera’s date and time. The
		Time zone setting allows you to specify the time zone
		where the camera is mainly used and whether or not
	Time zone and date	daylight saving time is in effect. When the xtravel	E69
		destination is set, the camera automatically calculates
		the time difference between the travel destination and
		the whome time zone, and saves images using the
		date and time of the travel destination.
		Set the image display after shooting and the screen
General		brightness. When using Photo info, set whether or not
	Monitor settings	to display virtual horizon, histograms, and framing grid	E71
		on the monitor screen.
Camera		When using Virtual horizon display, set the virtual
		Imprint the shooting date and time on pictures at the
		horizon indicator to either Circle (default setting) or Bars.
Setup		time of shooting. The default setting is Off.
		Dates cannot be imprinted in the following situations.
		- When the scene mode is set to Easy panorama,
	Print date	Panorama assist, or 3D photography	E72
		- When Image quality (A75) is set to NRW (RAW),
		NRW (RAW) + Fine or NRW (RAW) + Normal
		- When Continuous H: 120 fps or Continuous H: 60
		fps is selected for Continuous (A71)
		- During movie recording
	Self-timer: after	Set whether or not to cancel the setting after shooting	E73
		pictures with the self-timer. The default setting is Exit
	release
		self-timer mode.

110