Nikon COOLPIXP7700BLK Using Preset Manual, E35, Using the Previously Measured White Balance Value

Quick Menu

Using Preset Manual

Use when you want to make pictures taken under unusual lighting conditions (such as lamps with reddish light) look as though they were shot in normal light. Use the procedure below to shoot after measuring the white balance value under the shooting light.

•Up to 3 preset values can be saved: PRE1, PRE2 and PRE3.

1 Place a white or gray reference object under the lighting that will be used during shooting.

2 Display the white balance quick menu (E33) and press the multi selector Jor Kto choose PRE1, PRE2 or PRE3.

•Items can also be chosen by rotating the main command dial.

White balance

Preset manual

Fine-tune

Preset manual 1

3 Press Ito choose Preset manual and press J or Kto choose PRE.

•The lens extends to the zoom position for measurement.

White balance

Preset manual

Fine-tune

Cancel

Reference

4 Frame a white or gray reference object in the
reference object frame and press the k
button.
• The shutter is released and the new white balance
preset value is set (no picture is recorded).	Measure
B Note on Preset Manual	Reference object frame
The camera cannot measure a white balance value for when the
flash fires. When shooting with the flash, set White balance to Auto (normal), Auto (warm
lighting) or Flash.

CUsing the Previously Measured White Balance Value

Choose fin step 3. The most recently measured value is set for white balance, without performing measurement again.

CPerforming Fine Adjustment for the Measured White Balance Value

After selecting preset PRE1, PRE2 or PRE3, select Fine-tuneand press the kbutton to perform fine adjustment for white balance (E34).

Section

E35