Nikon COOLPIXP7700BLK manual Options Available in the Shooting Menu, Target finding AF A84

Features That Can Be Set Using the d(Menu) Button (Shooting Mode)

Options Available in the Shooting Menu

Option	Description	A
Custom Picture	Allow you to store the customized settings based in
Control	COOLPIX Picture Control, which can set picture editing	E42
(COOLPIX Custom	options for recording images according to the shooting
Picture Control)	scene or your preferences.
	Select the method that the camera uses to measure the
Metering	brightness of the subject. The camera adjusts the	E43
	exposure, which is a combination of shutter speed and
	aperture value, based on the brightness measurement. The
	default setting is Matrix.
	Set the mode used for taking a series of pictures.
	• The default setting is Single (i.e. only one picture is
	captured at a time).
	• When Continuous H, Continuous M, Continuous L,
Continuous	or BSS (A39) is set, the pictures are shot continuously	E44	Shooting
	Multi-shot 16 is set, the specified number of pictures
	while the shutter-release button is fully held down.
	• If Continuous H: 120 fps, Continuous H: 60 fps, or		Features
	• If the Intvl timer shooting is set, the pictures are shot
	are shot continuously when the shutter-release button is
	fully held down.
	continuously at the set interval of 30 s, 1 min, 5 min, or
	10 min when the shutter-release button is fully held
	down once.
	Set how the camera determines the focus area using the
	autofocus to Face priority (A85), Auto, Manual,
AF area mode	Center (normal), Center (wide), Subject tracking or	E47
	Target finding AF (A84).
	• The AF area mode can also be selected by pressing the
	multi selector K(G).
	When Single AF (default setting) is selected, the camera
	focuses only while the shutter-release button is pressed
Autofocus mode	halfway. When Full-time AF is selected, the camera	E51
	focuses even when the shutter-release button is not
	pressed halfway. You may hear the sound of the camera
	focusing.
Flash exp. comp.	Adjust the flash output. Use this option when the flash is	E51
	too bright or too dark. The default setting is 0.0.
Noise reduction	Set the strength of the noise reduction function that is	E52
	normally performed when recording the picture. The
filter
	default setting is Normal.

71