Nikon COOLPIXP7700BLK Speedlights External Flash Unit, How to Attach the Speedlight, SB-R200

Speedlights (External Flash Unit)

With this camera, various features are available in combination with the Speedlight (external flash) supported by the Nikon Creative Lighting System (CLS) (A88). Use the Speedlight when the built-in flash cannot provide sufficient lighting.

The following Speedlights and Wireless Speedlight Commander can be used for the camera.

Speedlights	SB-910, SB-900, SB-800, SB-700, SB-600, SB-400,
	SB-R200*
Wireless Speedlight Commander	SU-800

*Speedlight used for remote flash. Attachment Ring SX-1 cannot be mounted on this camera. To use the SB-R200, it must be attached to the Speedlight Stand AS-20.

See our latest product catalogs or websites for up-to-date information on Speedlights that can be used for the COOLPIX P7700.

The built-in flash is set to W(off) automatically when using Speedlights or Wireless Speedlight Commander. While pis displayed on the monitor screen, the Speedlight flash mode is also displayed on the monitor, and it can be set with the same procedure as the built-in flash (A56).

How to Attach the Speedlight

• Remove the accessory shoe cover before attaching the Speedlight or Wireless Speedlight Commander as shown on the right (1).

•When the built-in flash is raised, gently push to lower the flash until it clicks shut.

•Refer to the instruction manual of your Speedlight for more information on how to

attach the Speedlight and details on how to use it.

• Attach the accessory shoe cover when the Speedlight is not in use.

Shooting Features

BNote on External Flash

Attempting to attach external flashes that do not support this camera may damage the camera and the external flash.

87