Yamaha mcx-1000 manual Auto-storing CDs, When storage is complete, the following screen

	Storing music on the MusicCAST server
4 When storage is complete, the following screen
		Auto-storing CDs
appears on the on-screen display:

•To check the content you have just stored, choose “Open stored album page” and press SELECT.

•To store another CD, choose “Store another CD” and press

SELECT.

-The disc tray automatically opens. Place a new CD in the disc tray after removing the CD you have just stored, and repeat the storage procedure.

5Press OPEN/CLOSE to open the disc tray. Remove the disc and press OPEN/CLOSE again to close the disc tray.

•The MusicCAST server distributes MP3 files to MusicCAST clients by default. Please wait for the conversion process to finish before attempting to listen to the songs you have just stored on your MusicCAST client. You can check if the MusicCAST server is currently converting songs by looking at the MP3 encode schedule (see page 132). The exact time this process takes depends upon the number and length of the songs the MusicCAST server is converting.

•Do not disconnect the MusicCAST server from the AC outlet during the storage process as errors in storage may appear along with problems with data on the hard disk.

•Do not bump or vibrate the MusicCAST server during storage, as it may damage the hard disk drive.

•The MusicCAST server automatically stores copyrighted CDs in analog mode at 1x speed, and is not capable of storing digital copies of a such CDs at high speed.

CD AUTO STORE

You can also use an automatic procedure to store CDs on your MusicCAST server.

1Load a CD into the disc tray.

2Press CD AUTO STORE on the MusicCAST server.

The MusicCAST server stores all songs on the CD.

The MusicCAST server stores any information it can obtain about the songs stored from its internal Gracenote CDDB, or the Internet-based Gracenote CDDB service, if set to do so. If the MusicCAST server finds multiple entries for this CD in the Gracenote CDDB it automatically selects the top entry from the list.

During the storage process the MusicCAST server displays a progress bar in the lower portion of the on- screen diaplay indicating how far it has progressed with the storage, and icons indicating that storage is taking place.

NOTE

By default, the MusicCAST server is set to obtain information an CD content from its built-in Gracenote CDDB. See page 119 for an explanation of how to change these settings.

Storing music on the MusicCAST server

HINT

You can change song titles, and album, artist, and genre names whenever you wish (see page 57).

25