Yamaha mcx-1000 118, Set the date and time, To set the date and time manually

System setup

3Set the date and time.

•To set the date and time manually

Remove the check from the “Use NTP server” checkbox,

and use / // to move the cursor to the field you want to set. Use / // to change the setting.

•To connect to the NTP server and set the date and time automatically

Place a check in the “Use NTP server” checkbox.

Use / // to move to cursor to the right of the “Use NTP server” field and press SELECT. The character entry screen appears on the on-screen display. Use this screen to enter the address of the NTP server. Refer to the user’s information guide from your Internet provider or NTP service for this address. If may be an IP address, or URL. If you want to use a URL, please confirm that you have set the DNS setting of the MusicCAST server correctly first (see page 108).

Refer to page 78 for an explanation of how to use the character entry screen.

When you finish entering the address, use / // to move the cursor to “OK” and press select. Select “Cancel” to return to the Date/Time screen without changing any settings.

Use the same method to set your time zone, and the frequency with which you want the MusicCAST server to access the NTP server.

Use / // to move the cursor to the “Synchro. interval” field and use / to set the time interval at which you wish the MusicCAST server to access the NTP server for time and date updates.

Use / // to move the cursor to the “Time zone” field and use / to select an appropriate time zone.

If you are in a time zone that is using daylight saving, use / // to move the cursor to “Daylight saving” and press

SELECT to place a check in the checkbox.

4Use / // to move the cursor to “OK” and press SELECT.

The on-screen display Returns to the System Setup screen. Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

•Check that the MusicCAST server is correctly connected to the Internet when you attempt to connect it to the NTP server.

•You should set this parameter again if you disconnect the MusicCAST server from the AC outlet for more than 1 minute.

118