Yamaha mcx-1000 manual Setting the auto-play function, 120, Set the connection parameters

System setup

3Set the connection parameters.

Use / // and SELECT to place a check in the checkbox of the function you want the MusicCAST server to use. You

can select multiple options if necessary.

•Perform CD lookups automatically

The MusicCAST server automatically refers to the Gracenote CDDB for information every time you load a CD in the disc tray.

•Use MusicCAST server database

The MusicCAST server uses the Gracenote CDDB stored on its internal hard disk to search for CD information.

•Use Internet database

The MusicCAST server uses the Internet-based Gracenote CDDB service to search for CD information.

Due to the nature of the Internet the MusicCAST server may not be able to access the Internet-based Gracenote CDDB service. You can set the maximum time the MusicCAST server uses attempting to connect to the Internet-based Gracenote CDDB. Use / // to move the cursor to “Access timeout” and then use / to set the maximum time the MusicCAST server should use before stopping access.

NOTE

•The Gracenote CDDB stored on the MusicCAST server internal hard disk drive only contains information on CDs available up to the date the MusicCAST server was shipped from the factory. The Internet-based Gracenote CDDB contains up to date information an CDs.

•The MusicCAST server must be connected to the Internet to connect to the Internet-based Gracenote CDDB service.

4Use / to move the cursor to “OK” and press

SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

Setting the auto-play function

Set the autoplay function to automatically begin playback when the MusicCAST server power is turned on.

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

2Use / to move the cursor to “Playback” and press SELECT.

The Playback screen appears on the on-screen display.

3Use / to move the cursor to the checkbox and press SELECT to place a check in the checkbox if you wish to the MusicCAST server to begin playback of the last song played every time you turn it on.

•“When playback of a group finishes”

Set the action you want the MusicCAST server to take when it completes playback of an album, artist, group, or playlist.

4Use / // to move the cursor to “OK” and press SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

120