System setup

Setting the video output parameters

You can change the manner in which the MusicCAST outputs the on-screen display to the TV/monitor. You can set it to always output the display, or to automatically turn the display off when you are not using it.

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

2Use / to move the cursor to “Video Out” and press SELECT.

The Video Out screen appears on the on-screen display.

3Select the output type:

“Always output the on-screen display”

The MusicCAST server always outputs the on-screen display.

“Only show on-screen display during operation”

The MusicCAST server turns the on-screen display off if you do not use it for a specified period of time.

To change the delay before the MusicCAST server turns the on-screen display off, use / // to move the cursor to the “Delay before halting display” field and set the delay time.

When the MusicCAST server is set in Type 2 mode, pressing and holding MENU or PLAY INFO. for two seconds turns off the on-screen display. Press any key to return the on-screen display to normal.

4Use / // to move the cursor to “OK” and press SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

Setting the Gracenote CDDB connection

Set the way you want the MusicCAST server to use the Gracenote CDDB service to look for CD information.

1 Follow the procedure described on page 117

2 Use / to move the cursor to “Gracenote

“Opening the system setting screens” to

CDDB” and press SELECT.

display the System Setup screen.

The Gracenote CDDB database screen appears on the on-

 

screen display.

System setup

119

Page 119
Image 119
Yamaha mcx-1000 Setting the video output parameters, Setting the Gracenote Cddb connection, 119, Select the output type