System setup

Setting up a PS/2 keyboard

Connect a standard PS/2 keyboard to the PS/2 keyboard jack on the front panel of the MusicCAST server to make entering characters and numbers easier. Use this screen to configure the MusicCAST server for the keyboard you wish to connect to it.

NOTE

Disconnect the MusicCAST server from the AC outlet before attempting to connect the PS/2 keyboard.

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

2Use / to move the cursor to “Keyboard Type” and press SELECT.

The Keyboard Type screen appears on the on-screen display.

3Use / // and SELECT to select the language of the keyboard that you want to connect to the MusicCAST server.

NOTE

Refer to the user manual of your PS/2 keyboard to check its type and language.

4Use / // to move the cursor to “OK” and press SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

The MusicCAST server is not compatible with USB keyboards.

Do not connect on disconnect a PS/2 keyboard when the MusicCAST is connected to an AC outlet. See page 79 for more information.

Setting the standby mode

Pressing STANDBY/ON on the MusicCAST server or the MusicCAST server remote control, switches the MusicCAST server to standby mode. Set the conditions required to turn the MusicCAST server on from standby mode.

2

Use / to move the cursor to “Standby

 

 

 

mode” and press SELECT.

 

 

 

Leave the MusicCAST server connected to an AC outlet if you

The Standby Mode screen appears on the on-screen display.

wish to use this functionality.

 

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

126

Page 126
Image 126
Yamaha mcx-1000 manual Setting up a PS/2 keyboard, Setting the standby mode, 126, Use / to move the cursor to Standby