Yamaha mcx-1000 manual 123, Tuner distribution setting, Off

•Synchronize power ON/OFF with the MusicCAST

The AV receiver will turn on when you turn the MusicCAST server on.

•Change surround program for each genre played.

The MusicCAST server will automatically change the surround program on the AV receiver to suit the song it is playing back.

To automatically change the surround settings on the AV receiver, you first need to register surround information to the songs recorded on the MusicCAST server (see page 91).

■Tuner distribution setting

The MusicCAST server can distribute audio output from your AV receiver tuner to MusicCAST clients. Each MusicCAST client can select from the radio stations you have set on the AV receiver (called “Tuner presets”). This function does not work for units without a tuner.

Ensure that you set the ANALOG REC LEVEL control on the front panel of the MusicCAST server to a level where you can comfortably hear the tuner output.

Use the / to move the cursor to the option you wish to select and press SELECT. To use the tuner in your AV receiver with the MusicCAST server, connect the REC OUT or ZONE 2 OUT jacks on the AV receiver to the ANALOG IN jacks on the MusicCAST server.

•REC OUT

The AV receiver outputs the audio signal from its tuner from its REC OUT jacks.The input setting on your AV receiver changes to TUNER when you use a MusicCAST clients to select or change a tuner preset.

•ZONE 2 OUT

The AV receiver outputs the audio signal from its ZONE 2 OUT jacks.The ZONE 2 INPUT setting on your AV receiver changes to TUNER when you use a MusicCAST client to select or changes a tuner preset.

•Off

The function is inactive.

4When you finish setting the parameters described in the previous step, move the cursor to “OK” and press SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen.

System setup

System setup

123