3Use / // to select a standby mode, and press SELECT.

“Mode 1”

You can only activate the MusicCAST server from the remote control or the MusicCAST server.

“Mode 2”

You can activate the MusicCAST server from the remote control, the MusicCAST server, and MusicCAST clients connected to the MusicCAST server.

System setup

4Use / // to move the cursor to “OK” and press SELECT.

The display returns to the System Setup screen.

Select “Cancel” to return to the System Setup screen without changing any settings.

HINT

Press BACK to return to the previous screen. See page 18 for more information on standby modes.

Setting the brightness of the front panel display

You can set the brightness of the front panel display to suit your needs. For example, you may want to darken the on-screen display so that it is not overly bright if you are operating the MusicCAST server in a room used for viewing movies.

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

2Use / to move the cursor to “FL Dimmer” and press SELECT.

The FL Dimmer screen appears on the on-screen display.

3Use / to select a brightness mode, and press SELECT.

“Bright”

Sets the front panel display to maximum brightness.

“Medium”

Sets the front panel display to medium brightness.

“Dark”

Sets the front panel display to minimum brightness.

4Press BACK to return to the System Setup screen.

HINT

Press BACK to return to the previous screen.

System setup

127

Page 127
Image 127
Yamaha mcx-1000 Setting the brightness of the front panel display, 127, Press Back to return to the System Setup screen