System setup

This section explains how to configure the MusicCAST system settings. You can set each parameter using the setting screens on the on-screen display.

System Setup menus

The system setup section contains the following menus:

Network

Configure MusicCAST network settings to enable MusicCAST clients to connect to the MusicCAST server, and to connect the MusicCAST server to the Internet.

Date/Time (page 117)

Set the date and time on your MusicCAST server, or configure it to use an Internet based NTP server for automatic date and time updates.

Video Out (page 119)

Set parameters for displaying the on-screen display on a TV/ monitor.

Gracenote CDDB (page 119)

Set the manner in which the MusicCAST server uses the Gracenote CDDB to search for information on CDs.

Playback (page 120)

Select whether or not the MusicCAST server begins playback immediately when you turn it on.

Recording (page 121)

Set the type and quality of data that the MusicCAST stores on its hard disk drive.

AV Receiver (page 122)

Set parameters for controlling a YAMAHA AV receiver or receiver connected to the MusicCAST server via an RS-232C cable.

Auto Level Control (page 124)

on-screen display (page 124)

Select the menu page the MusicCAST server displays when you turn it on.

Client (page 125)

Select whether or not the MusicCAST server distributes PCM files to a client, and designate a client for PCM file streaming.

Keyboard Type (page 126)

Select the type configuration of the PS/2 keyboard you wish to connect to the MusicCAST server.

Standby Mode (page 126)

Select the standby mode you wish the MusicCAST server to use.

FL dimmer (page 127)

Set the brightness of the display on the front panel of the MusicCAST server.

Hard Drive Utilities (page 128)

Delete data stored on the hard disk drive of the MusicCAST server.

System Utilities (page 128)

Update or reset the system firmware of the MusicCAST server.

Select whether or not the MusicCAST server automatically adjusts the playback volume for songs with widely differing base recording levels.

Default system settings

The following table illustrates the default settings for all of the parameters described in this section.

 

 

 

 

 

 

Setting menu

Parameter group

Parameter name

Parameter setting

 

 

 

 

 

 

 

 

Network

Auto/Manual Configuration

No Clients configured

 

 

System

 

Expert settings - IP Address

Automatically obtain IP address with

OFF

 

 

 

 

 

 

DHCP (DHCP Client)

 

 

 

 

 

IP Address

192.168.1.1

 

setup

 

 

Subnet Mask

255.255.255.0

 

 

 

Default Gateway

192.168.1.1

 

 

 

 

DNS Server (P)

0.0.0.0

 

 

 

 

DNS Server (S)

0.0.0.0

 

 

 

Expert settings - Wireless LAN

ESSID

MCxxxxx (A unique 5 digit ID set

 

 

 

 

 

when the MusicCAST server is

 

 

 

 

 

shipped)

 

 

 

 

Channel

6

 

 

 

 

WEP key

MCyyyyyyyyyyy (A unique 11

 

 

 

 

 

digit ID set when the MusicCAST

 

 

 

 

 

server is shipped).

 

 

 

 

 

 

 

 

115

Page 115
Image 115
Yamaha mcx-1000 manual System Setup menus, Default system settings, 115