Yamaha mcx-1000 Setting AV receiver parameters, 122, Audio connection settings, Control Settings

System setup

Setting AV receiver parameters

Set the parameters for use with an AV receiver connected to the MusicCAST server with an RS-232C cable.

•Check that the MusicCAST server and the AV receiver are connected correctly.

•You can check that the AV receiver you use is controllable from the MusicCAST server on page 133.

■Audio connection settings

Set the AV receiver input on the AV receiver connected to the MusicCAST server.

You must set this parameter, correctly to use the MusicCAST server to change surround program settings.

1Follow the procedure described on page 117 “Opening the system setting screens” to display the System Setup screen.

2Use / to move the cursor to “AV Receiver” and press SELECT.

The AV Receiver screen appears on the on-screen diaplay.

When the MusicCAST server cannot confirm that it is connected to an AV receiver, it displays the following message on the on-screen display.

If this screen appears, check the connections between the MusicCAST server and the AV receiver, and the AV receiver brand. The MusicCAST server AV control function only works correctly when the MusicCAST server is connected to a YAMAHA AV receiver with an RS-232C cable.

3Use / to move the cursor to an appropriate field and press SELECT.

Use / // to select the AV receiver input the MusicCAST is connected to.

■Control Settings

Set the AV receiver control functions.

Use the / to move the cursor to the option you want to set and press SELECT to place a check in the checkbox.

•“Synchronize power ON/OFF with the MusicCAST”

The MusicCAST server turns on the AV receiver when you turn the MusicCAST server on.

•“Change surround program for each genre played”

The MusicCAST server changes to surround effect setting on the AV receiver each time the playback song changes.

NOTE

Use the / and SELECT to remove the checks from the checkboxes if you do not wish to use these functions.

122