Yamaha mcx-1000 manual Use / to move the cursor to CD Duplicate and press Select

Creating CDs

7Use / to move the cursor to “CD Duplicate” and press SELECT.

The following screen appears on the on-screen display:

8Press OPEN / CLOSE to open the disc tray, load in the disc you want to duplicate, then press OPEN / CLOSE again.

The follow screens appear on the on-screen display in sequence.

9Use / to move the cursor to “Start” and press SELECT.

The MusicCAST server begins recording the CD to its hard disk drive.

•When you push SELECT to cancel recording, the MusicCAST server deletes the data that had been transferred up to the point of cancellation.

•Due to the rules imposed by the SCMS (Serial Copy Management System) the MusicCAST server cannot duplicate tracks which do not allow digital copying.

10Press OPEN/CLOSE place a new audio CD-R or CD-RW in the disc tray, and press OPEN/CLOSE again.

Place the CD-R or CD-RW in the disc tray in line with the disc tray markings, recording surface down, and press OPEN/CLOSE.

If the disc you insert already has data on it, or if you insert a non-recordable disc, the screen below appears on the on-screen display. Place a new CD-R or CD-RW, or a CD-RW that has been initialized (see page 89) in the disc tray.

You cannot add songs to a CD-R or CD-RW that has already had material recorded on it. If you want to re-use a CD-RW, initialize it (see page 89) before beginning the recording process.

11When you close the disc tray, the MusicCAST server reads the information on the disc, and then automatically begins recording the data recorded in step 9 to it.

Use only audio CD-R or CD-RWs when recording songs from your MusicCAST server.

86