Yamaha mcx-1000 Press TOP Menu Use / to move the cursor to the parameter, You want to change

Using the MusicCAST with a YAMAHA AV receiver

If you connect a YAMAHA receiver to your MusicCAST server using a cross type RS-232C cable, the MusicCAST server can control the volume, change inputs and effect programs, and perform other operations in combination with the receiver, as well as transmit radio broadcasts from YAMAHA AV receivers to MusicCAST clients.

RS-232C

RS-232C

1 Press TOP MENU.	3 Use / to move the cursor to the parameter
The Top Menu screen appears on the on-screen display.	you want to change.
	•	“Standby/On”
		Switches the receiver between ON and STANDBY modes.
	•	“Vol”
		Adjusts the volume of the output from the receiver.
	•	“Inputs”
		Selects an input for the receiver to use.
	•	“Programs”
		Selects the DSP program the receiver applies to its sound
		output.
	•	“Presets”
		Selects a tuner preset from amongst those stored on a
		receiver.

2Use / to move the cursor to “AV Receiver” and press SELECT.

The AV Receiver screen appears on the on-screen display.

The contents of the display depends on the type of YAMAHA AV receiver you connect to the MusicCAST server.

4Use / to change the setting of the parameter.

HINT

•You can set the input channel that the MusicCAST server uses on the receiver (see page 122).

•You can set the MusicCAST server to change the DSP program of the receiver to a specific setting for each song (see page 91).

•The MusicCAST server can display a list of the YAMAHA AV receivers it can control (see page 133).

•You can set the MusicCAST server to turn the receiver power on whenever you turn the MusicCAST server power on. (see page 122)

•Set the 6 channel input parameter on your receiver to “OFF”.

90