Yamaha mcx-1000 manual 138

Appendix

SYMPTOM	CAUSE	REMEDY	PAGE
You cannot start playback on the	Auto Configuration has not finished.	→ Carry out the Auto Configuration	106
MCX-A10.		process.
	The network settings are incorrect.	→ Check the network settings.	108
	The MCX-1000 is not turned on.	→ Turn the MCX-1000 on.
	There are no songs which the	→ Wait until MP3 encoding is	132
	MCX-1000 has finished encoding to	complete.
	MP3 format in the MCX-1000 library.
	Surroundings are interfering with	→ Try using a different wireless	108
	wireless network signals (for wireless	network channel, or use a wired
	connections only).	network connection.
There are skips or pauses during	Surroundings are interfering with	→ Try using a different wireless	108
playback from the MCX-A10.	wireless network signals (for wireless	network channel, or use a wired
	connections only).	network connection.
	The network is extremely congested	Place your MusicCAST components
	(for wired network connections).	under a different subnet mask.
The MusicCAST server does not	The MCX-1000 is set not to access the	→ Set the MCX-1000 to access the	119
appear to find the correct album,	Gracenote CDDB.	Gracenote CDDB.
or finds	The MCX-1000 is only accessing its	→ The built-in Gracenote CDDB	119
no albums at all, when you
	internal Gracenote CDDB.	database on the MCX-1000 may not
attempt to store an album.
		contain data on some CDs. Set the
		MCX-1000 to access the Gracenote
		Gracenote CDDB via the Internet
		(note: connect the MCX-1000 to the
		Internet first).
	The MCX-1000 cannot access the	→ Check the network settings.
	Internet-based Gracenote CDDB
	service even though it is set to do so.
The MCX-1000 does not display	This happens occasionally when using	→ Edit the text manually.	57
the data it obtains from the	the Gracenote CDDB, particulary when
Gracenote CDDB correctly.	other languages are registered in the
	database.
The MCX-1000 does not appear	The MCX-1000 is distributing MP3	→ Stop one of these processes.
to complete MP3 encoding.	songs to MusicCAST clients and
	playing back MP3 songs
	simultaneously.
The MCX-1000 stops storing	The hard disk drive is full.	→ Delete any songs you do not need, or	57
songs prematurely.		delete PCM versions of songs.
	The MCX-1000 is set to Synch.	→ Store songs manually.	29
	Recording for signals from external
	inputs.
You are unable to select some	You are attempting to select songs for	The MusicCAST server cannot record	27
songs for recording to the CD.	which only MP3 files exist.	MP3 files to CD.
You cannot enter the CD creation	The MCX-1000 is already recording	→ Stop all other recording.
or CD storing screens after	something other than the item you are
recording from an external	attempting to select.
device.
The MCX-1000 does not record	The analog level is set too low.	→ Use the level adjustment dial on the	28
or playback from the analog input		front panel of the MCX-1000 to set
jacks.		an appropriate recording level.
You cannot change from external	The MusicCAST is recording from an	→ Stop recording from an external	27
input to another playback option.	external input.	source.
Playback changes from the	Another operator is changing sources.	→ Stop the operator from changing
external input for no apparent		sources.
reason.
The MCX-1000 does not control	You are using a “straight” type RS-	→ Use a “cross” RS-232C cable.
the AV receiver correctly.	232C cable.
	You have not set the MCX-1000 to	→ Set The MusicCAST server to	91, 122
	change AV receiver settings.	change AV receiver settings.
	The AV receiver 6 channel input	→ Set the AV receiver 6 channel setting
	parameter, is set to “ON”.	to “OFF”.

138