Playback

Using the MusicCAST server to listen to CDs

You can use the MusicCAST server as a standard CD player to listen to CDs.

1Press OPEN/CLOSE to open the disc tray.

If there is already a CD in the MusicCAST server, skip directly to step 4.

2Place the CD in the MusicCAST server in the disc tray.

Place the CD in the tray label-side up, aligned with the grooves on the disc tray.

3Press OPEN/CLOSE to close the disc tray.

When you load a CD, the MusicCAST server reads the type and volume and looks for the names of the songs, album, artist, and genre in its built-in Gracenote CDDB database.

This operation can take a few seconds.

4Press TOP MENU.

The Top Menu screen appears on the on-screen display.

5Use / to move the cursor to “Library” and press SELECT.

The Library screen appears on the on-screen display.

6Use / to move the cursor to “CD”and press

SELECT.

While the MusicCAST server is reading information from the CD, the message “Reading data” appears on the on-screen display. The CD screen appears on the on-screen display.

The names of all of the songs on the CD are displayed.

See page 23 for a detailed explanation of how the MusicCAST server reads information from discs.

The above information is not displayed for some discs, or when you set the MusicCAST server not to use the Gracenote CDDB database (see page 119 for a move detailed explanation).

48

Page 48
Image 48
Yamaha mcx-1000 manual Using the MusicCAST server to listen to CDs, Place the CD in the MusicCAST server in the disc tray