Premium 200Mbps Powerline AC | - | User’s Manual | |
|
|
|
|
Chapter 3 Forming a Powerline Network
This chapter describes how to form a HomePlug AV logical network (AVLN) using the Security pushbutton and using the Utility. Operation progress and outcome can be monitored by observing the behavior of the power LED.
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to authenticate/access) values are connected to the same powerline. Users want to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security button:
1.Press the Security button on Device A for less than 3 seconds.
2.Press the Security button on Device B for less than 3 seconds. The button on B must be pressed within 2 minutes
3.Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval until the operation succeeds or fails. The Power indicator will illuminate steadily on successful completion. If an error occurs, the Power indicator on both devices will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario:
