Rosewill RPLC-200P user manual Powerline Adapter’s Button and Connector, Reset/Security

Premium 200Mbps Powerline AC Pass-Through AV+ Adapter				- RPLC-200PKIT-		User’s Manual
		-	Off		The PLC adapter is powered off.
		Green	On		Ethernet connection has established.
			Blink		Data is being transmitted.
	(Ethernet)
		-	Off		No Ethernet connection.
		Green/Orange/Red	On		The PLC adapter has connected to the
					powerline network. The Data LED color
	(Data)				may vary according to the Data
					Transmit Quality.
					Green: Data Transmit Quality Excellent
					Orange: Data Transmit Quality Average
					Red: Data Transmit Quality Poor
		-	Off		The PLC adapter does not connect to
					the powerline network.

1.5.2 Powerline Adapter’s Button and Connector

Reset/Security:

Reset: Pressing and holding the Button for between 10 seconds and 15 seconds makes the adapter restore the factory default settings.

Security: Pressing and holding the button for less than 3 seconds makes the adapter a member of the existing Powerline Network.

Ethernet Port (RJ45 Port): The Ethernet port connects to an Ethernet network cable. The other end of the cable connects to your computer or other Ethernet-enabled network device.

Connecting to the router/modem: Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or above for Gigabit Network environment) to this port, and the other end to the router or modem. Then plug into the electrical outlet.

Connecting to PC / Smart TV / NB / Blu-ray Player / Media Player / IP Phone:

Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or above) to this port, and the other end to the other devices. Then plug into the electrical outlet.

-8-